Type of memory installed?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

smithse79

Active Member
Sep 17, 2014
205
39
28
44
I have a Dell CS24-SC with 8GB of RAM that I want to upgrade. Is there a way to find out which type of ECC memory is installed without having to tear into it and physically look at it and look up a part number? OpenManage and the BMC just say ECC DDR2. This is an old cloud server so the service tag obviously isn't on the Dell support site either. It's running Centos 6.5
 

smithse79

Active Member
Sep 17, 2014
205
39
28
44
It's funny you mention that, I just found that utility tonight. The only mention of ECC type in anything I've been able to find is multi-bit ECC. I'm just not sure what that means. I'm assuming this is unbuffered ECC but
 

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,645
2,062
113
I'd just open it and look :)

Software may report running speed not actual speed, not sure about complete model #s, etc...
 

smithse79

Active Member
Sep 17, 2014
205
39
28
44
I'd just open it and look :)

Software may report running speed not actual speed, not sure about complete model #s, etc...
Thats what I'm coming to realize. However, all of the documentation I'm finding online shows that these servers run registered ECC. I can get decent amounts for cheap since it's DDR2 so it won't hurt to pick some up
 
  • Like
Reactions: T_Minus

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,645
2,062
113
I'm not sure about DDR2 but the single, dual, quad rank may affect your total memory/stick capacity recognized by your motherboard.

My advice, don't willy-nilly buy DDR2 ECC RDIMM. I'd crack it and be 100%. Just talking from experience ;)
 

smithse79

Active Member
Sep 17, 2014
205
39
28
44
I'm not sure about DDR2 but the single, dual, quad rank may affect your total memory/stick capacity recognized by your motherboard.

My advice, don't willy-nilly buy DDR2 ECC RDIMM. I'd crack it and be 100%. Just talking from experience ;)
but... but... I don't have a rack yet and it's at the bottom of a 3 server pile...
 

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,645
2,062
113
LOL :) Like me, too many chassis in the way to get other projects done.

Today I hope to eliminate my stack like yours, and push forward hehe
 

JustinH

Active Member
Jan 21, 2015
124
76
28
48
Singapore
Here is a sample:
Handle 0x110C, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: 4
Locator: DIMM_B4
Bank Locator: Not Specified
Type: DDR3
Type Detail: Synchronous Registered (Buffered)
Speed: 1333 MHz
Manufacturer: 00CE00B380CE
Serial Number: 828E5904
Asset Tag: 02112361
Part Number: M393B1K70CHD-YH9
Rank: 2
 

EffrafaxOfWug

Radioactive Member
Feb 12, 2015
1,394
512
113
You might also like to try lshw; both that and dmidecode should be able to report the exact DIMMs you have installed but unsure if RHEL/centos includes both of these by default. IIRC `lshw -class memory`.