So I have a dual Epyc system running a pair of 7551 cpus with smt disabled, using a supermicro h11dsi rev 2 board and an 850w power supply. I'm wondering what the most stable method would be to bump up the clock speed or allowed tdp a bit with this board. Not sure if I can. But running no smt, and 6 heat pipe 4u coolers in a big well ventilated gaming PC case the system is sitting at 100% load 24 hours a day the temp never leaves 57* it is rock steady. so I feel like I have plenty of safe head room, each cpu sits around 175 of it's rated 180 watts
I have seen mention of zenstates with the 1.0 board and a modified bios possibly? And a lot of misc now dead links or to questionable download sources. but most are several years old and I keep running into dead ends and links or missing key info.
Any direction I can get to a good answer would be greatly appreciated. I don't want to end up downloading a jenky bios and screwing up a system I can't afford to replace. But also can never not screw with things
I have seen mention of zenstates with the 1.0 board and a modified bios possibly? And a lot of misc now dead links or to questionable download sources. but most are several years old and I keep running into dead ends and links or missing key info.
Any direction I can get to a good answer would be greatly appreciated. I don't want to end up downloading a jenky bios and screwing up a system I can't afford to replace. But also can never not screw with things