[SOLVED] Switching to Brocade, network interrupts

Caennanu

Member
May 18, 2021
50
3
8
Gday all,

After succesfully purchasing a brocade icx 6350P 48 port. I'm starting to transfer my network over from the linksys LGs3088P.
Now, everything initially worked fine, untill i transferred my iTV over.
From that moment onward i keep getting random network interrupts on all vlan's.
They don't last long, but long enough for most sessions to stop, CCTV camera's having to initialize and putty . . . lets not talk about putty :p

So, since IGMP v2 is required for my iTV to work, i checked the settings, set it to v2 as a double check on the vlan my iTV boxes are on. Config is active and its showing my router's ip adres as querier port. So this seems fine.
But i keep getting interrupts. Any idea why?

1634221163521.png
 
Last edited:

Caennanu

Member
May 18, 2021
50
3
8
For testing purposes, i have put the itv's back on the LGS308P in the original configuration, with the exception that the brocade is connected.
The issue persists.
 

Caennanu

Member
May 18, 2021
50
3
8
Right, no idea what was wrong, but i cleared all the vlan's, added them new and everything is working fine and dandy . . . very odd.