how do i add back the sleep choice in the shutdown/restart in start menu in windows server 2019? is there like a registry change or something like that? i was able to reenable sleep in power option but the sleep option is missing in the restart/shutdown part of the menu..
sleep in windows server 2019 start menu
- Thread starter wildpig1234
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
So no one ever has success in getting sleep button to show up in start menu for windows server? ;(
i did ... still no sleep show up in the start menu along with shutdown and restart.
i can enable the sleep under power option in control panel and specify time to go to sleep, but there is no sleep selection to go along with restart and shutdown under start menu....
ok will check that later tonite... but seems like it says only in the power option menu in control panel?
i don't think sleep was avail in server 2016 either.... but i figure there would be a simple way to make it appears in start menu but no luck so far.... can only set the sleep timer but can't get sleep to show up in start menu.
Go to cmd run as admin.... powercfg hibernate on.... then set sleep time in control panel power option
Still no idea how to get that sleep button...
Would be nice to be able to since there are people that use quad cpu WS.. and you have to use windows server when it morm than two sockets
Still no idea how to get that sleep button...
Would be nice to be able to since there are people that use quad cpu WS.. and you have to use windows server when it morm than two sockets
Could well be motherboard specific ?
I tried to get sleep enabled with Server 2016 on Supermicro X9DRi-F and X10DRi motherboards and was unsuccessful. I contacted SM tech support and their response was ..
I tried to get sleep enabled with Server 2016 on Supermicro X9DRi-F and X10DRi motherboards and was unsuccessful. I contacted SM tech support and their response was ..
I then asked about which Workstation boards and the response was ..
Not sure if that helps at all
It's motherboard-specific. Sleep requires S3/S2R support from the motherboard itself, without that Windows won't enable the sleep routines.
Under windows you can check what your board supports with powercfg /a; from my windows workstation:
Code:
C:\Windows\system32>powercfg /a
The following sleep states are available on this system: Standby ( S3 )
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
Standby (S2)
The system firmware does not support this standby state.
Hibernate
Hibernation has not been enabled.
Hybrid Sleepstill can't find a way to enable the sleep choice in windows server 2019 power menu. they say supposedly this was disabled at the dll level. i am wondering if i can replace that dll with the one from regular windows 10 but i have no idea which dll for now...
to manually enter into the sleep mode you could do from the command line and make a desktop shortcut : rundll32.exe powrprof.dll,SetSuspendState 0,1,0
How to sleep Windows 10 from the command line
can also set the power button to trigger sleep if pressed.
well, let us know on here if anyone can somehow enable the sleep button in server 2019 power menu.
to manually enter into the sleep mode you could do from the command line and make a desktop shortcut : rundll32.exe powrprof.dll,SetSuspendState 0,1,0
How to sleep Windows 10 from the command line
can also set the power button to trigger sleep if pressed.
well, let us know on here if anyone can somehow enable the sleep button in server 2019 power menu.
Last edited: