I cannot yet report success from my side.Happy to report that my Unleashed install with a R730->R850 Dedicated Master updated to 200.15.6.12.304 without a hitch.
Not sure if it matters, but I did the online update via Administration->Upgrade; updated all at once with auto-reboot.I cannot yet report success from my side.
Since the update to 200.15.6.12.304 I cannot login via browser any longer. Both, Edge and Firefox under Windows 11 showing to me an empty screen after providing the login credentials.
Still not working for me. I tried Edge and Firefox on Win 11 and Win Server 2022. Also Edge on Android is not working. Spining-up any Linux VM I will test tomorrow.Via Safari, though I just checked and loging in works with Edge on Win11 as well.
stupid question - have you tried deleting cookies and cache?Still not working for me. I tried Edge and Firefox on Win 11 and Win Server 2022. Also Edge on Android is not working. Spining-up any Linux VM I will test tomorrow.
Can you verify the post-upgrade software release? It looks like Ruckus kernel changes cause a panic on the R730 and will rollback your upgrade.Happy to report that my Unleashed install with a R730->R850 Dedicated Master updated to 200.15.6.12.304 without a hitch.
/writable
filesystem was changed so the downgraded 200.14 isn't functioning correctly.So maybe I have a (hopefully not unstable) unicorn.Can you verify the post-upgrade software release? It looks like Ruckus have added extra checks for the R730 and will rollback your upgrade.
I guess @tubs-ffm either got unlucky and was actually upgraded, or enough of the/writable
filesystem was changed so the downgraded 200.14 isn't functioning correctly.
I forced the update and have a brick until I can pop it open and fix with a serial cable.
ruckus# show sysinfo
System Overview:
Name= XXX-Unleashed
IP Address= XXX
MAC Address= XXX
Uptime= 7h 13m
Model= R850
Serial Number= XXX
Version= 200.15.6.12 build 304
<snip>
Memory Utilization:
Used Bytes= 258576(kB)
Used Percentage= 15%
Free Bytes= 1475436(kB)
Free Percentage= 85%
Dedicated Master:
Status= Enabled
Smart Redundancy:
Status= Enabled
Local Connect Status= Disconnected
Peer IP Address =
Peer Connect Status = Disconnected
Shared Secret=
This is a good sign.So maybe I have a (hopefully not unstable) unicorn.
So hacked R730 owners may be stuck on Unleashed 200.14 forever. If this is a problem for you then now might be a good time to offload your R730 on eBay.Alignment with SmartZone (CFG802.11/Driver, Hostapd, configuration)
Something has gone a bit wrong with your paste @fohdeesha• Alignment with SmartZone (CFG802.11/Driver, Hostapd, conC]r-ࢢonőĺ
• User interface enhancements in terms of UI label changes, panel enhancements, and orࢢmb-ࢢonĺ
Normal PDF shenanigansSomething has gone a bit wrong with your paste @fohdeesha
It is not a stupid question. It is the first to do in such a case.stupid question - have you tried deleting cookies and cache?
Sorry, I might have confused people in this round.I guess @tubs-ffm either got unlucky and was actually upgraded, or enough of the/writable
filesystem was changed so the downgraded 200.14 isn't functioning correctly.
any adblockers / script blockers / similar? Dev Console saying anythign?It is not a stupid question. It is the first to do in such a case.
I did and it di not fixed the isse.
Yeah. You need to convert both.I have two R730 on the way to mess with.
I want to run unleashed like I did with my two R710 before.
Just to clarify BOTH need to be modded to R850 to work together correct? Not just one to be the parent and adopt the other R730 with default firmware as that firmware would not support Unleashed adoption.
No add-on tool. Fire Fox, Brave and Edge in Standard configuration. I also tested by switching off the standard protection functions in the browser. No firewall or router in between. All in the same network segment.any adblockers / script blockers / similar? Dev Console saying anythign?
show events-activities
and show alarm
also do not show anything beside join and reboot Information.weird.I give up and let it run. If other people also are affected, a patch will come soon. If I need to reconfigure I will roll back.
There is something suspicious:BTW Dev Console meant the console in the browser (e.g. Chrome F12), then go To "Console" and it might show some errors
One or more documents in this page is in Quirks Mode, which will render the affected document(s) with quirks incompatible with the current HTML and CSS specifications.
Quirks Mode exists mostly due to historical reasons. If this is not intentional, you can add or modify the DOCTYPE to be `<!DOCTYPE html>` to render the page in No Quirks Mode.
1 element
Uncaught TypeError: Cannot read properties of undefined (reading 'enabled')
at Function.mapToProps (dashboard.js?v=6.304:1:1947783)
at r (base.js?v=6.304:1:1062544)
at r.mapToProps (base.js?v=6.304:1:1062663)
at r (base.js?v=6.304:1:1062526)
at i (base.js?v=6.304:1:2014300)
at base.js?v=6.304:1:2014798
at Object.run (base.js?v=6.304:1:1057759)
at c.initSelector (base.js?v=6.304:1:1060294)
at new c (base.js?v=6.304:1:1059197)
at On (base.js?v=6.304:1:1288552)