Hi community,
I'm new here and I saw there is a lot of skilled guys here.
It's why I try to get some help from you here.
I explain my case :
I have a Ruckus AP R350 which constently reboots
I managed to get a serial connection and get in uboot.
After many hours trying to find a solution, I cannot get to anything.
I managed to downloawn a firmware with tftpboot and boot it but it seems always to finish with a kernel panic on boot.
I send you the normal boot log (when AP boots on standard firmware)
Maybe you can help. THx in advance.
I'm new here and I saw there is a lot of skilled guys here.
It's why I try to get some help from you here.
I explain my case :
I have a Ruckus AP R350 which constently reboots
I managed to get a serial connection and get in uboot.
After many hours trying to find a solution, I cannot get to anything.
I managed to downloawn a firmware with tftpboot and boot it but it seems always to finish with a kernel panic on boot.
I send you the normal boot log (when AP boots on standard firmware)
Maybe you can help. THx in advance.
Code:
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00098-IPQ60xxLZB-1
S - IMAGE_VARIANT_STRING=IPQ6018LA
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu121
S - Boot Interface: SPI
S - Secure Boot: Off
S - Boot Config @ 0x000a602c = 0x000002e1
S - JTAG ID @ 0x000a607c = 0x0013a0e1
S - OEM ID @ 0x000a6080 = 0x00000000
S - Serial Number @ 0x000a4128 = 0x674d8421
S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000a4130 = 0x0000000008000001
S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83383000009
S - PBL Patch Ver: 1
S - I-cache: On
S - D-cache: On
B - 3413 - PBL, Start
B - 592 - bootable_media_detect_entry, Start
B - 4340 - bootable_media_detect_success, Start
B - 4436 - elf_loader_entry, Start
B - 4608 - auth_hash_seg_entry, Start
B - 10855 - auth_hash_seg_exit, Start
B - 11349 - elf_segs_hash_verify_entry, Start
B - 357981 - elf_segs_hash_verify_exit, Start
B - 362173 - auth_xbl_sec_hash_seg_entry, Start
B - 362317 - auth_xbl_sec_hash_seg_exit, Start
B - 368869 - xbl_sec_segs_hash_verify_entry, Start
B - 368869 - xbl_sec_segs_hash_verify_exit, Start
B - 369800 - PBL, End
B - 295972 - SBL1, Start
B - 435814 - GCC [RstStat:0x2, RstDbg:0x420100] WDog Stat : 0x4
B - 438254 - clock_init, Start
D - 3721 - clock_init, Delta
B - 447801 - boot_flash_init, Start
D - 8052 - boot_flash_init, Delta
B - 458140 - sbl1_ddr_set_default_params, Start
D - 183 - sbl1_ddr_set_default_params, Delta
B - 464759 - boot_config_data_table_init, Start
D - 1891 - boot_config_data_table_init, Delta - (575 Bytes)
B - 473909 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:0,Subtype:3
B - 479429 - Image Load, Start
D - 6619 - OEM_MISC Image Loaded, Delta - (0 Bytes)
B - 488793 - Image Load, Start
D - 5063 - PMIC Image Loaded, Delta - (0 Bytes)
B - 496662 - sbl1_ddr_set_params, Start
B - 501572 - CPR configuration: 0x555
B - 504836 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 538355 - Image Load, Start
D - 549 - APDP Image Loaded, Delta - (0 Bytes)
B - 557174 - Image Load, Start
D - 518 - QTI_MISC Image Loaded, Delta - (0 Bytes)
B - 559705 - Image Load, Start
D - 884 - Auth Metadata
D - 671 - Segments hash check
D - 29402 - QSEE Dev Config Image Loaded, Delta - (36490 Bytes)
B - 591029 - Image Load, Start
D - 6496 - Auth Metadata
D - 10340 - Segments hash check
D - 816180 - QSEE Image Loaded, Delta - (1436620 Bytes)
B - 1407758 - Image Load, Start
D - 702 - Auth Metadata
D - 946 - Segments hash check
D - 64538 - RPM Image Loaded, Delta - (102800 Bytes)
B - 1473912 - Image Load, Start
D - 610 - Auth Metadata
D - 3141 - Segments hash check
D - 313967 - APPSBL Image Loaded, Delta - (566894 Bytes)
B - 1805386 - SBL1, End
D - 1509811 - SBL1, Delta
S - Flash Throughput, 1000 KB/s (2144051 Bytes, 1139590 us)
S - Core 0 Frequency, 800 MHz
S - DDR Frequency, 466 MHz
U-Boot 2016.01 (May 10 2021 - 08:31:12 -0700)
GD66 1.0.4.60.R350
DRAM: smem ram ptable found: ver: 2 len: 4
Ram top: 0x7d800000 Ram size: 0x3d800000
984 MiB
NAND: ONFI device found
ID = 1590ac01
Vendor = 1
Device = ac
vendor = 1 timing_parameters = 1
qpic_nand: changing oobsize to 64 from 128 bytes
nand devnum = 0
SPI_ADDR_LEN=3
SF: Detected MX25U12835F with page size 256 Bytes, erase size 64 KiB, total 16 MiB
nand devnum = 1
ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x1000000
528 MiB
MMC: sdhci: Node Not found, skipping initialization
In: serial@78B1000
Out: serial@78B1000
Err: serial@78B1000
machid: 8030003
Net: MAC0 addr:0:3:7f:ba:db:ad
phy_chip_id: 0x4dd074 phy_id: 0
PHY ID1: 0x4d
PHY ID2: 0xd074
phy_chip_id: 0xffffffff phy_id: 1
phy_chip_id: 0xffffffff phy_id: 2
phy_chip_id: 0xffffffff phy_id: 3
phy_chip_id: 0xffffffff phy_id: 4
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
eth0
SPI_ADDR_LEN=3
SF: Detected MX25U12835F with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0x6a0000, size 0x7c
SF: 124 bytes @ 0x6a0000 Read: OK
device 0 offset 0x6a8000, size 0xd0
SF: 208 bytes @ 0x6a8000 Read: OK
Checking crashdump env: disabled
No Himem Boot Script !!!
Checking auto/recovery boot
Booting image rcks_wlan.main (1) type:1/1 ...
Hit Ctrl-c to stop autoboot: 0
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "mtd=0", size 192 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 1536, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
ubi0: available PEBs: 63, total reserved PEBs: 1473, PEBs reserved for bad PEB handling: 80
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (3276800)
Extracting MD5 Hash from the Image Header ...
MD5# E4E88798BD5490532FD3D6E728E0D706
Calculating MD5 hash of the Image ...
Read 0 bytes from volume ubi_rootfs to 44000000
No size specified -> Using max size (18852957)
Calculated MD5# E4E88798BD5490532FD3D6E728E0D706
Image Integrity Check is PASSED
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (3276800)
## Loading kernel from FIT Image at 440000a0 ...
Using 'config@3' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-4.4.60
Type: Kernel Image
Compression: uncompressed
Data Start: 0x44000184
Data Size: 3065008 Bytes = 2.9 MiB
Architecture: ARM
OS: Linux
Load Address: 0x42008000
Entry Point: 0x42008000
Hash algo: crc32
Hash value: 0cc8aa66
Hash algo: sha1
Hash value: 3fb8f8cd2b4a5618e8f4658fa61c7dbe3dafe32b
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 440000a0 ...
Using 'config@3' configuration
Trying 'fdt@3' fdt subimage
Description: ARM OpenWrt Ruckus-Cypress-DTB device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4430e8f4
Data Size: 62138 Bytes = 60.7 KiB
Architecture: ARM
Hash algo: crc32
Hash value: de552cdc
Hash algo: sha1
Hash value: 72ba8fb8c44b371166ee9f95c14a22065fadc5bb
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4430e8f4
Loading Kernel Image ... OK
Loading Device Tree to 484ed000, end 484ff2b9 ... OK
invalid mtd device 'spi0.0'
Using machid 0x8030003 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.60 (jenkins@l42-re-ssd5) (gcc version 4.8.3 20140401 (prerelease) (Linaro GCC 4.8-2014.04) ) #1 SMP Tue May 11 00:16:02 PDT 2021
[ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C4
[ 0.000000] Command line is: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait ubi.mtd=rcks_wlan.main root=mtd:ubi_rootfs brd=R350 fips_sku=0 fips=0 Length:159
[ 0.000000] Ignoring memory range 0x40000000 - 0x42000000
[ 0.000000] rks_brd(R350)
[ 0.000000] cma: Reserved 48 MiB at 0x7a800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 107 pages/cpu @b7e96000 s408576 r8192 d21504 u438272
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 204432
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait ubi.mtd=rcks_wlan.main root=mtd:ubi_rootfs brd=R350 fips_sku=0 fips=0 swiotlb=1 coherent_pool=8M vmalloc=350M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 756828K/825344K available (6756K kernel code, 348K rwdata, 1896K rodata, 672K init, 343K bss, 19364K reserved, 49152K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xbc000000 - 0xff800000 (1080 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbb800000 ( 952 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80208000 - 0x80a7b414 (8654 kB)
[ 0.000000] .init : 0x80a7c000 - 0x80b24000 ( 672 kB)
[ 0.000000] .data : 0x80b24000 - 0x80b7b37c ( 349 kB)
[ 0.000000] .bss : 0x80b7b37c - 0x80bd0fbc ( 344 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000014] Switching to timer-based delay loop, resolution 41ns
[ 0.000509] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.000520] pid_max: default: 32768 minimum: 301
[ 0.000593] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000602] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001063] CPU: Testing write buffer coherency: ok
[ 0.001347] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001391] Setting up static identity map for 0x42208280 - 0x422082d8
[ 0.006852] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007378] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.007888] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.007933] Brought up 4 CPUs
[ 0.007955] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.007960] CPU: All CPU(s) started in SVC mode.
[ 0.022963] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4
[ 0.023258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.023283] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.024714] pinctrl core: initialized pinctrl subsystem
[ 0.025812] NET: Registered protocol family 16
[ 0.030513] DMA: preallocated 8192 KiB pool for atomic coherent allocations
[ 0.033284] cpuidle: using governor ladder
[ 0.037300] cpuidle: using governor menu
[ 0.049092] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[ 0.059713] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.059724] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.060873] CPU: IPQ6010, SoC Version: 1.0
[ 0.061067] <CORE> glink_init: IPC Logging Disabled
[ 0.061342] <CORE> glink_core_register_transport: IPC Logging disabled
[ 0.061503] msm_glink_smem_native_xprt rx fifo not found
[ 0.061648] glink_rpm_native_probe: TOC id 1982861328 is not valid
[ 0.071934] usbcore: registered new interface driver usbfs
[ 0.071995] usbcore: registered new interface driver hub
[ 0.072047] usbcore: registered new device driver usb
[ 0.072112] pps_core: LinuxPPS API ver. 1 registered
[ 0.072118] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.072141] PTP clock support registered
[ 0.074381] cfg80211: World regulatory domain updated:
[ 0.074392] cfg80211: DFS Master region: unset
[ 0.074398] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 0.074408] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 0.074418] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 0.074426] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 0.074436] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 0.074446] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 0.074454] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 0.074463] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 0.074471] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 0.074491] clocksource: Switched to clocksource arch_sys_counter
[ 0.077100] NET: Registered protocol family 2
[ 0.077513] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.077598] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.077739] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.077785] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.077819] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.077967] NET: Registered protocol family 1
[ 0.079335] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.080261] rks_timestamp init
[ 0.080792] [rks_timestamp] enabling user-mode PMU access on CPU #1
[ 0.080796] [rks_timestamp] enabling user-mode PMU access on CPU #2
[ 0.080807] [rks_timestamp] enabling user-mode PMU access on CPU #3
[ 0.088686] [rks_timestamp] enabling user-mode PMU access on CPU #0
[ 0.088687] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.088986] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.091861] io scheduler noop registered
[ 0.091876] io scheduler deadline registered (default)
[ 0.099248] NET: Registered protocol family 27
[ 0.099261] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[ 0.099276] qmi_log_init: IPC Logging disabled
[ 0.099281] qmi_log_init: IPC Logging disabled
[ 0.099426] msm_rpm_log_probe: OK
[ 0.135597] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.136417] msm_serial 78b1000.serial: msm_serial: detected port #0
[ 0.136451] msm_serial 78b1000.serial: uartclk = 1843199
[ 0.136494] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 20, base_baud = 115199) is a MSM
[ 0.136521] msm_serial: console setup on port #0
[ 0.856327] console [ttyMSM0] enabled
[ 0.861406] msm_serial: driver initialized
[ 0.864949] diag: IPC Logging disabled
[ 0.871882] brd: module loaded
[ 0.874441] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xac
[ 0.875324] nand: ONFI 10-Compliant AMD/Spansion S34MS04G2
[ 0.881848] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 0.887170] 3 ofpart partitions found on MTD device qcom_nand.0
[ 0.894690] Creating 3 MTD partitions on "qcom_nand.0":
[ 0.900593] 0x000000000000-0x00000c000000 : "rcks_wlan.main"
[ 1.065398] 0x00000c000000-0x000018000000 : "rcks_wlan.bkup"
[ 1.224930] 0x000018000000-0x000020000000 : "datafs"
[ 1.332068] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.332847] m25p80 spi32766.0: found mx25u12835f, expected n25q128a11
[ 1.338196] m25p80 spi32766.0: mx25u12835f (16384 Kbytes)
[ 1.344576] 14 ofpart partitions found on MTD device spi32766.0
[ 1.349903] Creating 14 MTD partitions on "spi32766.0":
[ 1.355630] 0x000000000000-0x000000800000 : "NOR"
[ 1.361535] 0x000000000000-0x0000000c0000 : "SBL1"
[ 1.366372] 0x0000000c0000-0x0000000d0000 : "MIBIB"
[ 1.371054] 0x0000000d0000-0x0000000f0000 : "BOOTCONFIG"
[ 1.375859] 0x0000000f0000-0x000000110000 : "BOOTCONFIG1"
[ 1.381437] 0x000000110000-0x0000002b0000 : "QSEE"
[ 1.386758] 0x0000002b0000-0x000000450000 : "QSEE_1"
[ 1.391440] 0x000000450000-0x000000460000 : "DEVCFG"
[ 1.396547] 0x000000470000-0x0000004b0000 : "RPM"
[ 1.401425] 0x0000004f0000-0x000000500000 : "CDT"
[ 1.406020] 0x000000510000-0x000000520000 : "APPSBLENV"
[ 1.410735] 0x000000520000-0x0000005c0000 : "APPSBL"
[ 1.415793] 0x000000660000-0x0000006a0000 : "ART"
[ 1.421002] 0x0000006a0000-0x0000006b0000 : "Board Data"
[ 1.426083] spi_qup 78b8000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.431664] libphy: Fixed MDIO Bus: probed
[ 1.657379] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[ 1.657504] libphy: qca_mdio: probed
[ 1.662523] qca-mdio 90000.mdio: qca-mdio driver was registered
[ 1.665961] tun: Universal TUN/TAP device driver, 1.6
[ 1.671478] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.676778] Unable to create IPC log context!
[ 1.683205] cnss: Platform driver probed successfully.
[ 1.688333] dwc3-qcom 8af8800.usb3: unable to get dbm device
[ 1.894505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.894544] ehci-pci: EHCI PCI platform driver
[ 1.899974] ehci-platform: EHCI generic platform driver
[ 1.904922] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.909495] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.915364] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
[ 1.922637] xhci-hcd xhci-hcd.0.auto: irq 183, io mem 0x07000000
[ 1.931859] hub 1-0:1.0: USB hub found
[ 1.937535] hub 1-0:1.0: 1 port detected
[ 1.941367] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.945163] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 1.950514] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.958517] hub 2-0:1.0: USB hub found
[ 1.966359] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.970186] i2c /dev entries driver
[ 1.980605] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[ 1.980707] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 864000 KHz
[ 1.987835] sdhci: Secure Digital Host Controller Interface driver
[ 1.996362] sdhci: Copyright(c) Pierre Ossman
[ 2.002350] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.007387] Error: Driver 'qcrypto' is already registered, aborting...
[ 2.012674]
[ 2.012674] Version Rollback Feature Disabled
[ 2.019244] DEV CI test message
[ 2.024979] remoteproc remoteproc0: q6v5-wcss is available
[ 2.027901] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group
[ 2.033266] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group
[ 2.043635] remoteproc remoteproc1: q6v5-m3 is available
[ 2.053863] v54_bsp: Version 1.1
[ 2.053863] Copyright (c) 2004-2007 Ruckus Wireless, Inc.All Rights Reserved
[ 2.059221] v54_flash_read: offset:32768, len:208
[ 2.069743] v54_flash_read: offset:0, len:124
[ 2.074641] ------------[ cut here ]------------
[ 2.078398] WARNING: CPU: 3 PID: 1 at /home/jenkins/slaves-workdir/tdc-buildssd-pkg/workspace/AP-SOLO_116.0_H550-DFS_DISABLED/linux/kernels/linux-4.4.60/drivers/gpio/gpiolib.c:85 gpio_to_desc+0xac/0xbc()
[ 2.083231] ---[ end trace 02b37188a9bdd825 ]---
[ 2.100872] gpiod_request: invalid GPIO
[ 2.105730] Failed to request PHY_RESET_2 GPIO: -22
[ 2.109291] bsp_reset: gpio init failed
[ 2.145261] v54rb: creating proc file himem_v54rb
[ 2.145277] v54cf: create proc file himem_v54cf
[ 2.148932] v54td: create proc file himem_v54td
[ 2.153319] init_v54_board_data: HiMem Physical Memory (start=7f800000, size=800000)
[ 2.157836] init_v54_board_data: HiMem virtual memory start = bc780000
[ 2.165775] init_v54_board_data: HiMem virtual memory end = bcf80000
[ 2.172202] init_v54_board_data: Target dump Physical Memory (start=7d800000, size=2000000)
[ 2.178961] init_v54_board_data: Target dump virtual memory start = bd000000
[ 2.298424] rb_init_module: device=v54rb, major=55, count=3 ...
[ 2.298454] rb_init_module: setup dev v54rb major=55, minor=0, mem_start=bc97df00, sizeof(ring_buffer)=16
[ 2.303501] rb_init_module: setup dev v54rb major=55, minor=1, mem_start=bcb7be00, sizeof(ring_buffer)=16
[ 2.312958] rb_init_module: setup dev v54rb major=55, minor=2, mem_start=bcd79d00, sizeof(ring_buffer)=16
[ 2.322596] cf_init_module: device=v54cf, major=56, count=2 ...
[ 2.332223] cf_init_module: 0 begin=0xbcf77c20 size=0x3fe0
[ 2.338382] cf_init_module: 1 begin=0xbcf7bc20 size=0x3fe0
[ 2.343682] td_init_module: device=v54td, major=58 ...
[ 2.349154] rks_wrapper: initializing...
[ 2.354855] NET: Registered protocol family 10
[ 2.358879] NET: Registered protocol family 17
[ 2.362732] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.367133] 8021q: 802.1Q VLAN Support v1.8
[ 2.379890] Hello world, ruckus generic netlink!
[ 2.383812] register rks_genl_family succeeded
[ 2.388743] Registering SWP/SWPB emulation handler
[ 2.395481] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy
[ 2.404548] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout
[ 2.404579] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868
[ 2.610648] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.610677] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 2.616008] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
[ 2.622599] xhci-hcd xhci-hcd.1.auto: irq 187, io mem 0x08a00000
[ 2.631585] hub 3-0:1.0: USB hub found
[ 2.637508] hub 3-0:1.0: 1 port detected
[ 2.641224] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.645142] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 2.650464] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.658236] hub 4-0:1.0: USB hub found
[ 2.666324] hub 4-0:1.0: 1 port detected
[ 2.670215] UBI error: cannot open mtd rootfs, error -2
[ 2.673964] ubi0: attaching mtd0
[ 2.682694] random: nonblocking pool is initialized
[ 3.662758] ubi0: scanning is finished
[ 3.669769] ubi0: attached mtd0 (name "rcks_wlan.main", size 192 MiB)
[ 3.669791] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.675185] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.681953] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.688811] ubi0: good PEBs: 1536, bad PEBs: 0, corrupted PEBs: 0
[ 3.695584] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.701832] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[ 3.708952] ubi0: available PEBs: 63, total reserved PEBs: 1473, PEBs reserved for bad PEB handling: 80
[ 3.717206] ubi0: background thread "ubi_bgt0d" started, PID 129
[ 3.727098] hctosys: unable to open rtc device (rtc0)
[ 3.737105] rks_pkt_trace_init create tif0 successfully.
[ 6.234526] VFS: Mounted root (squashfs filesystem) readonly on device 31:18.
[ 6.234908] Freeing unused kernel memory: 672K (80a7c000 - 80b24000)
read_caldata_to_fs from /dev/mtdblock15
65536+0 records in
65536+0 records out
modprobe: module usbserial.ko not found in modules.dep
[ 7.691148] udevd (152): /proc/152/oom_adj is deprecated, please use /proc/152/oom_score_adj instead.
loading iot usb modules
watchdog ........ [started] (0.059)
[ 11.257564] ip_local_port_range: prefer different parity for start/end values.
net.ipv4.ip_local_port_range = 32768 61000
net.core.rmem_max = 225280
net.core.rmem_default = 225280
net.core.wmem_default = 225280
net.core.wmem_max = 225280
[ 11.294974] ubi: mtd0 is already attached to ubi0
[ 11.296170] ubi1: attaching mtd1
[ 12.278142] ubi1: scanning is finished
[ 12.285884] ubi1: attached mtd1 (name "rcks_wlan.bkup", size 192 MiB)
[ 12.285910] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 12.291310] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 12.298072] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 12.304930] ubi1: good PEBs: 1536, bad PEBs: 0, corrupted PEBs: 0
[ 12.311699] ubi1: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 12.317952] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[ 12.325072] ubi1: available PEBs: 63, total reserved PEBs: 1473, PEBs reserved for bad PEB handling: 80
[ 12.333327] ubi1: background thread "ubi_bgt1d" started, PID 188
[ 12.343993] ubi2: attaching mtd2
UBI device number 1, total 1536 LEBs (195035136 bytes, 186.0 MiB), available 63 LEBs (7999488 bytes, 7.6 MiB), LEB size 126976 bytes (124.0 KiB)
[ 13.015763] ubi2: scanning is finished
[ 13.023173] ubi2: attached mtd2 (name "datafs", size 128 MiB)
[ 13.023198] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 13.027904] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 13.034672] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 13.041524] ubi2: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0
[ 13.048292] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 13.054545] ubi2: max/mean erase counter: 188/82, WL threshold: 4096, image sequence number: 35027504
[ 13.061668] ubi2: available PEBs: 31, total reserved PEBs: 993, PEBs reserved for bad PEB handling: 80
[ 13.071183] ubi2: background thread "ubi_bgt2d" started, PID 205
UBI device number 2, total 1024 LEBs (130023424 bytes, 124.0 MiB[ 13.086693] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 216
), available 31 LEBs (3936256 bytes, 3.8 MiB), LEB size 126976 bytes (124.0 KiB)
[ 13.132330] UBIFS (ubi2:0): recovery needed
[ 13.232480] UBIFS (ubi2:0): recovery completed
[ 13.232535] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "data"
[ 13.235818] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 13.243026] UBIFS (ubi2:0): FS size: 114024448 bytes (108 MiB, 898 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
[ 13.253008] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 13.263593] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 8159E91E-B640-4F09-AEA3-4CF75D06FCF4, small LPT model
ubi2:data /writable ubifs rw,sync,relatime 0 0
Initializing random number generator... done.
- rpm version(4), older version(0) -
Jan 1 00:00:13 Custom_Migrate[263]: No custom v1 file, nothing to do...
mtd:ubi_rootfs on / type squashfs (ro,relatime)
/proc on /proc type proc (rw,relatime)
sys on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)
none on /sys/kernel/debug type debugfs (rw,relatime)
[ 13.507640] procfs_write: buf=enable 1 1
[ 13.507640] , len=11
[ 13.512349] procfs_write: cmd=enable, dev minor=1, val=1, buf=(null)
ubi2:data on /writable type ubifs (rw,sync,relatime)
Ap_model
R710
Incorrect board unable to reset IoT chips
[ 13.605802] procfs_write: buf=enable 0 1
[ 13.605802] , len=11
[ 13.605830] procfs_write: cmd=enable, dev minor=0, val=1, buf=(null)
[ 13.610903] procfs_write: buf=printk 0
[ 13.610903] , len=9
[ 13.617382] procfs_write: cmd=printk, dev minor=0, val=0, buf=(null)
sys_init ........ [started] (2.384)
rsm_oem_legacy: get null oem company name
[ 13.708634] rks_ioctl: module 8 cmd 3 not supported
rsm_init ........ [started] (0.177)
[ 13.823710] rudb: module license 'Proprietary' taints kernel.
[ 13.823739] Disabling lock debugging due to kernel taint
[ 16.393949] EDMA ver 1 hw init
[ 16.394192] EDMA HW Reset completed succesfully
[ 16.395926] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23)
[ 16.400320] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 16.406406] dp1: dp_priv->macid = 1 macid = 0, name = (unnamed net_device) macaddress= 6c:aa:b3:3d:59:13
[ 16.410840] eth0 is assigned to 1-th devices
[ 16.419701] **********************************************************
[ 16.423938] * NSS Data Plane driver
[ 16.430262] **********************************************************
[ 16.652044] nss_driver - fw of size 702076 bytes copied to load addr: 40000000, nss_id : 0
[ 16.652850] Supported Frequencies -
[ 16.659197] 187.2 MHz 748.8 MHz
[ 16.665175] 1.4976 GHz [ 16.666127]
[ 16.668766] node size 2 # items 4
[ 16.669959] memory: 40000000 1031798784 (avl 840982528) items 4 active_cores 1
[ 16.673175] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[ 16.680291] 7f4f5900: NSS core 0 DDR from 40000000 to 41000000
[ 16.687221] 7f4f5900: meminfo init succeed
kernel_resource . [started] (2.917)
timer ........... [started] (0.000)
[ 16.724516] node size 2 # items 4
[ 16.724547] memory: 40000000 1031798784 (avl 841142272) items 4 active_cores 1
[ 16.727063] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[ 16.734166] 7f4f5900: nss core 0 booted successfully
fips-mode ....... [started] (0.008)
/bin/sh: /usr/sbin/rngd: not found
rngd ............ [started] (0.017)
Fri Jul 1 16:55:00 UTC 2022
Starting network... 1 eth0
network: CPU affinity is enabled
network ......... [started] (0.087)
eee ............. [started] (0.007)
fips_nss_post ... [started] (0.006)
[ 17.214822] DID VID 7f58b780
[ 17.214891] DID VID 7f58b7d1
[ 17.216816] tpm_spi_tis spi32765.1: 1.2 TPM (device-id 0x7F58, rev-id 16)
[ 17.231833] tpm_spi_tis spi32765.1: Issuing TPM_STARTUP
tpm ............. [started] (0.603)
cat: can't open '/proc/v54bsp/fips_sku': No such file or directory
rpki ............ [started] (1.096)
[ 18.603871] qdf_dbg_mask value is invalid
[ 18.603891] Using the default module debug levels instead
[ 18.606863] qdf_print_ctrl_register: Allocated print control object 0
[ 18.612275]
MINIDUMP VA .bss start=7f5a5240 module=qdf
[ 20.758519] wlan: [427:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50
[ 20.758591] register rks_hs20_genl_family_ops succeeded
[ 20.768273] register rks_ekahau_genl_family_ops succeeded
[ 20.773304] register rks_aerosct_genl_family succeeded
[ 20.778859] register rks_sw2_genl_family_ops succeeded
[ 20.783903]
MINIDUMP VA .bss start=7f89dbc0 module=umac
[ 21.283460] qca_ol: unknown parameter 'nss_wifi_olcfg' ignored
[ 21.283492] qca_ol: unknown parameter 'nss_wifi_nxthop_cfg' ignored
[ 21.289405]
MINIDUMP VA .bss start=7fb716c0 module=qca_ol
[ 21.474848] wlan: [437:I:ANY] =======ol_if_register_wifi3_0==========
[ 21.474848]
[ 21.474890] wlan: [437:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:7fc87008
[ 21.481862] remoteproc remoteproc1: powering up q6v5-m3
[ 21.498072] remoteproc remoteproc1: Booting fw image IPQ6018/m3_fw.mdt, size 6860
[ 21.498102] Sanity check passed for M3 image
[ 21.545042] remoteproc remoteproc1: remote processor q6v5-m3 is now up
[ 21.545126] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done
[ 21.550469] wlan: [437:I:ANY] ol_ath_ahb_ssr: 210: ol_ath_ahb_ssr: SSR event 2
[ 21.555936] remoteproc remoteproc0: powering up q6v5-wcss
[ 21.581841] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[ 21.582310] Sanity check passed for the image
[ 22.459889] glink_core_link_up glink is up
[ 22.460038] glink_xprt_open_event
[ 22.460253] Subsystem error monitoring/handling services are up
[ 22.460269] remoteproc remoteproc0: remote processor q6v5-wcss is now up
[ 22.460302] wlan: [437:I:ANY] ol_ath_ahb_ssr: 210: ol_ath_ahb_ssr: SSR event 3
[ 22.478957] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[ 22.579832] cnss: QMI WLFW service connected, state: 0x1
[ 22.580568] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 80bbd58c
[ 22.580636] cnss: device_id : 65533 mem mode : [0]
[ 22.581473] cnss: Target capability: chip_id: 0x11, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x21058629, fw_build_timestamp: 2021-05-11 00:55
[ 22.581473] cnss: BDF download response , result: 0, err: 0x0
[ 22.661626] wlan: [437:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode
[ 22.667685] Fatal error received from wcss software!:
[ 22.667685] QC Image Version: QC_IMAGE_VERSION_STRING=WLAN.HK.2.1-01577-QCAHKSWPL_SILICONZ-1
[ 22.667685] Image Variant : IMAGE_VARIANT_STRING=6018.wlanfw.evalQ
[ 22.667685]
[ 22.667685] phyrf_bdf.c:346 Assertion 0 failedparam0 :zero, param1 :zero, param2 :zero.
[ 22.667685] Thread ID : 0x00000071 Thread name : wlan_platform Process ID : 0
[ 22.667685] Register:
[ 22.667685] SP : 0x4afc7948
[ 22.667685] FP : 0x4afc7950
[ 22.667685] PC : 0x4acc2cf4
[ 22.667685] SSR : 0x00000008
[ 22.667685] BADVA : 0x00020000
[ 22.667685] LR : 0x4acc2068
[ 22.667685]
[ 22.667685] Stack Dump
[ 22.667685] from : 0x4afc7948
[ 22.667685] to : 0x4afc7dd0
[ 22.667685] [00] : 0x4BA06AD8
[ 22.667685] [01] : 0x4B1109BC
[ 22.667685] [02] : 0x4BA06ADC
[ 22.667685] [03] : 0x4BB2E838
[ 22.667685] [04] : 0x4B18A071
[ 22.667685] [05] : 0x4B18A071
[ 22.667685] [06] : 0x4B1B0D00
[ 22.735297]
[ 22.735297] [2022/7/1 16:55:5] [Uptime : 0 min]######### Q6 TARGET ASSERTED ########
[ 22.757062] SW Version: 116.0.0.0.1655 based on //depot/release/ap_116.0 CL 841235
[ 22.757062]
[ 22.766177] subsys-restart: subsystem_restart_dev(): Restart sequence requested for q6v5-wcss, restart_level = RELATED.
[ 22.775040] wlan: [46:I:ANY] ol_ath_ahb_ssr: 210: ol_ath_ahb_ssr: SSR event 9
[ 22.785792] wlan: [46:I:ANY] ol_ath_ahb_ssr: 385: Early assert cannot be handled
[ 32.661362] qmi_send_req_wait: Response Wait Error -110
[ 32.661387] cnss: Failed to send mode request, mode: MISSION(0), err: -110
[ 32.665395] cnss: ASSERT at line 974
[ 32.672327] ------------[ cut here ]------------
[ 32.676073] WARNING: CPU: 3 PID: 437 at /home/jenkins/slaves-workdir/tdc-buildssd-pkg/workspace/AP-SOLO_116.0_H550-DFS_DISABLED/linux/kernels/linux-4.4.60/drivers/net/wireless/cnss2/qmi.c:974 cnss_wlfw_wlan_mode_send_sync+0x400/0x420()
[ 32.683170] ---[ end trace 02b37188a9bdd827 ]---
[ 32.701241] wlan: [437:E:HIF] hif_pci_bus_configure: hif_wlan_enable error = -110
[ 32.706104] wlan: [437:E:HIF] hif_pci_bus_configure: failed, status = -110
[ 32.713480] wlan: [437:E:HIF] hif_enable: Target probe failed.
[ 32.767240] wlan: [437:I:ANY] hif_enable error = 16, reinit = 0
[ 32.767269] wlan: [437:I:ANY] Error in ol_hif_open
[ 32.767269]
[ 32.771968] wlan: [437:I:ANY] ol_ath_ahb_probe: 735: ol_ath_ahb_probe failure ret -12
[ 32.778220] wlan: [437:E:ANY] ol_ath_ahb_probe: 740: Assertion failed! 0:ol_ath_ahb_probe /home/jenkins/slaves-workdir/tdc-buildssd-pkg/workspace/AP-SOLO_116.0_H550-DFS_DISABLED/atheros/linux/driver/11axwifi/os/linux/../../qca_ol/../offload/os/linux/ath_ahb.c:740
[ 32.788392] Kernel panic - not syncing: Take care of the TARGET ASSERT first
[ 32.788392]
[ 32.809289] CPU: 3 PID: 437 Comm: insmod Tainted: P W 4.4.60 #1
[ 32.817966] Hardware name: Generic DT based system
[ 32.825086] [<80229c88>] (unwind_backtrace) from [<802254e4>] (show_stack+0x10/0x14)
[ 32.829692] [<802254e4>] (show_stack) from [<80462148>] (dump_stack+0x90/0xa4)
[ 32.837590] [<80462148>] (dump_stack) from [<802382a4>] (panic+0x10c/0x28c)
[ 32.844726] [<802382a4>] (panic) from [<7fb08210>] (ol_ath_ahb_probe+0x4c0/0x51c [qca_ol])
[ 32.851688] [<7fb08210>] (ol_ath_ahb_probe [qca_ol]) from [<7fb08970>] (ol_ath_ahb_ssr+0x704/0x7ec [qca_ol])
[ 32.859921] [<7fb08970>] (ol_ath_ahb_ssr [qca_ol]) from [<805efedc>] (cnss_qca8074_notifier_nb+0x24/0x80)
[ 32.869799] [<805efedc>] (cnss_qca8074_notifier_nb) from [<8025cfc4>] (srcu_notifier_call_chain+0x3c/0x7c)
[ 32.879261] [<8025cfc4>] (srcu_notifier_call_chain) from [<80509518>] (__subsystem_get+0x2b0/0x32c)
[ 32.888808] [<80509518>] (__subsystem_get) from [<805f321c>] (cnss_wlan_register_driver+0xcc/0x1a4)
[ 32.897849] [<805f321c>] (cnss_wlan_register_driver) from [<7fac6a0c>] (pld_register_driver+0xc8/0x144 [qca_ol])
[ 32.907004] [<7fac6a0c>] (pld_register_driver [qca_ol]) from [<7fc64134>] (init_ath_ahb_3_0+0xa0/0xec [wifi_3_0])
[ 32.917435] [<7fc64134>] (init_ath_ahb_3_0 [wifi_3_0]) from [<7fc9700c>] (init_ath_pci_3_0+0xc/0x200 [wifi_3_0])
[ 32.927473] [<7fc9700c>] (init_ath_pci_3_0 [wifi_3_0]) from [<80216058>] (do_one_initcall+0x134/0x210)
[ 32.937592] [<80216058>] (do_one_initcall) from [<802b7ed4>] (do_init_module+0x60/0x214)
[ 32.946704] [<802b7ed4>] (do_init_module) from [<802ba35c>] (load_module+0x22cc/0x2854)
[ 32.954948] [<802ba35c>] (load_module) from [<802baa5c>] (SyS_init_module+0x178/0x180)
[ 32.962676] [<802baa5c>] (SyS_init_module) from [<80209dc0>] (ret_fast_syscall+0x0/0x34)
[ 32.970665] CPU2: stopping
[ 32.978899] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P W 4.4.60 #1
[ 32.981421] Hardware name: Generic DT based system
[ 32.988630] [<80229c88>] (unwind_backtrace) from [<802254e4>] (show_stack+0x10/0x14)
[ 32.993319] [<802254e4>] (show_stack) from [<80462148>] (dump_stack+0x90/0xa4)
[ 33.001216] [<80462148>] (dump_stack) from [<80228a64>] (handle_IPI+0xe8/0x1f8)
[ 33.008246] [<80228a64>] (handle_IPI) from [<80209630>] (gic_handle_irq+0x80/0x94)
[ 33.015452] [<80209630>] (gic_handle_irq) from [<8020a700>] (__irq_svc+0x40/0x54)
[ 33.023089] Exception stack(0xb7897f80 to 0xb7897fc8)
[ 33.030639] 7f80: 00000001 00000000 00000000 8020b560 8092d8c8 00000000 00000000 80b22688
[ 33.035679] 7fa0: 80b288c0 80ac1364 80b288c8 b7894000 b7f6d388 b7897fd0 80221974 80221978
[ 33.043836] 7fc0: 60000013 ffffffff
[ 33.051989] [<8020a700>] (__irq_svc) from [<80221978>] (arch_cpu_idle+0x34/0x50)
[ 33.055296] [<80221978>] (arch_cpu_idle) from [<8027c490>] (cpu_startup_entry+0x164/0x2a8)
[ 33.062936] [<8027c490>] (cpu_startup_entry) from [<422096ec>] (0x422096ec)
[ 33.071005] CPU0: stopping
[ 33.077856] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W 4.4.60 #1
[ 33.080639] Hardware name: Generic DT based system
[ 33.087845] [<80229c88>] (unwind_backtrace) from [<802254e4>] (show_stack+0x10/0x14)
[ 33.092538] [<802254e4>] (show_stack) from [<80462148>] (dump_stack+0x90/0xa4)
[ 33.100435] [<80462148>] (dump_stack) from [<80228a64>] (handle_IPI+0xe8/0x1f8)
[ 33.107466] [<80228a64>] (handle_IPI) from [<80209630>] (gic_handle_irq+0x80/0x94)
[ 33.114670] [<80209630>] (gic_handle_irq) from [<8020a700>] (__irq_svc+0x40/0x54)
[ 33.122307] Exception stack(0x80b27f40 to 0x80b27f88)
[ 33.129857] 7f40: 00000001 00000000 00000000 8020b560 8092d8c8 00000000 00000000 80b22688
[ 33.134898] 7f60: 80b288c0 80ac1364 80b288c8 80b24000 b7e97388 80b27f90 80221974 80221978
[ 33.143055] 7f80: 60000013 ffffffff
[ 33.151207] [<8020a700>] (__irq_svc) from [<80221978>] (arch_cpu_idle+0x34/0x50)
[ 33.154515] [<80221978>] (arch_cpu_idle) from [<8027c490>] (cpu_startup_entry+0x164/0x2a8)
[ 33.162158] [<8027c490>] (cpu_startup_entry) from [<80a7ccfc>] (start_kernel+0x408/0x414)
[ 33.170226] CPU1: stopping
[ 33.178463] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W 4.4.60 #1
[ 33.181073] Hardware name: Generic DT based system
[ 33.188278] [<80229c88>] (unwind_backtrace) from [<802254e4>] (show_stack+0x10/0x14)
[ 33.192970] [<802254e4>] (show_stack) from [<80462148>] (dump_stack+0x90/0xa4)
[ 33.200869] [<80462148>] (dump_stack) from [<80228a64>] (handle_IPI+0xe8/0x1f8)
[ 33.207899] [<80228a64>] (handle_IPI) from [<80209630>] (gic_handle_irq+0x80/0x94)
[ 33.215104] [<80209630>] (gic_handle_irq) from [<8020a700>] (__irq_svc+0x40/0x54)
[ 33.222740] Exception stack(0xb7893f80 to 0xb7893fc8)
[ 33.230291] 3f80: 00000001 00000000 00000000 8020b560 8092d8c8 00000000 00000000 80b22688
[ 33.235332] 3fa0: 80b288c0 80ac1364 80b288c8 b7890000 b7f02388 b7893fd0 80221974 80221978
[ 33.243488] 3fc0: 60000013 ffffffff
[ 33.251642] [<8020a700>] (__irq_svc) from [<80221978>] (arch_cpu_idle+0x34/0x50)
[ 33.254948] [<80221978>] (arch_cpu_idle) from [<8027c490>] (cpu_startup_entry+0x164/0x2a8)
[ 33.262587] [<8027c490>] (cpu_startup_entry) from [<422096ec>] (0x422096ec)
[ 33.270666] The reading for sensor 4 is 0x00204168
[ 33.277512] The reading for sensor 5 is 0x0020516f
[ 33.282373] The reading for sensor 7 is 0x0020715b
[ 33.287192] Couldn't get reading for sensor 8
[ 33.291922] The reading for sensor 13 is 0x0020d172
[ 33.296349] The reading for sensor 14 is 0x0020e15e
[ 33.301036] The reading for sensor 15 is 0x0020f16b
[ 33.906019] Rebooting in 5 seconds..
[ 38.905958] Rebooting now ...
[ 38.905958]
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00098-IPQ60xxLZB-1
S - IMAGE_VARIANT_STRING=IPQ6018LA
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu121
S - Boot Interface: SPI
S - Secure Boot: Off
S - Boot Config @ 0x000a602c = 0x000002e1
S - JTAG ID @ 0x000a607c = 0x0013a0e1
S - OEM ID @ 0x000a6080 = 0x00000000
S - Serial Number @ 0x000a4128 = 0x674d8421
S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000a4130 = 0x0000000008000001
S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83383000009
S - PBL Patch Ver: 1
S - I-cache: On
S - D-cache: On
B - 3413 - PBL, Start
B - 592 - bootable_media_detect_entry, Start
B - 4340 - bootable_media_detect_success, Start
B - 4436 - elf_loader_entry, Start
B - 4608 - auth_hash_seg_entry, Start
B - 10855 - auth_hash_seg_exit, Start
B - 11352 - elf_segs_hash_verify_entry, Start
B - 357985 - elf_segs_hash_verify_exit, Start
B - 362178 - auth_xbl_sec_hash_seg_entry, Start
B - 362322 - auth_xbl_sec_hash_seg_exit, Start
B - 368872 - xbl_sec_segs_hash_verify_entry, Start
B - 368873 - xbl_sec_segs_hash_verify_exit, Start
B - 369802 - PBL, End
B - 296002 - SBL1, Start
B - 435814 - GCC [RstStat:0x2, RstDbg:0x420100] WDog Stat : 0x4
B - 438254 - clock_init, Start
D - 3690 - clock_init, Delta
B - 447801 - boot_flash_init, Start
D - 8052 - boot_flash_init, Delta
B - 458140 - sbl1_ddr_set_default_params, Start
D - 183 - sbl1_ddr_set_default_params, Delta
B - 464759 - boot_config_data_table_init, Start
D - 1860 - boot_config_data_table_init, Delta - (575 Bytes)
B - 473909 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:0,Subtype:3
B - 479429 - Image Load, Start
D - 6619 - OEM_MISC Image Loaded, Delta - (0 Bytes)
B - 488762 - Image Load, Start
D - 5094 - PMIC Image Loaded, Delta - (0 Bytes)
B - 496662 - sbl1_ddr_set_params, Start
B - 501572 - CPR configuration: 0x555
B - 504836 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 536983 - Image Load, Start
D - 549 - APDP Image Loaded, Delta - (0 Bytes)
B - 541283 - Image Load, Start
D - 2776 - QTI_MISC Image Loaded, Delta - (0 Bytes)
B - 547048 - Image Load, Start
D - 824 - Auth Metadata
D - 702 - Segments hash check
D - 29310 - QSEE Dev Config Image Loaded, Delta - (36490 Bytes)
B - 578310 - Image Load, Start
D - 6557 - Auth Metadata
D - 10462 - Segments hash check
D - 816577 - QSEE Image Loaded, Delta - (1436620 Bytes)
B - 1395405 - Image Load, Start
D - 3965 - RPM Image Loaded, Delta - (0 Bytes)
B - 1402329 - Image Load, Start
D - 641 - Auth Metadata
D - 3233 - Segments hash check
D - 315522 - APPSBL Image Loaded, Delta - (566894 Bytes)
B - 1735358 - SBL1, End
D - 1439753 - SBL1, Delta
S - Flash Throughput, 1000 KB/s (2041251 Bytes, 1085911 us)
S - Core 0 Frequency, 800 MHz
S - DDR Frequency, 466 MHz
U-Boot 2016.01 (May 10 2021 - 08:31:12 -0700)
GD66 1.0.4.60.R350
DRAM: smem ram ptable found: ver: 2 len: 4
Ram top: 0x7d800000 Ram size: 0x3d800000
984 MiB
NAND: ONFI device found
ID = 1590ac01
Vendor = 1
Device = ac
vendor = 1 timing_parameters = 1
qpic_nand: changing oobsize to 64 from 128 bytes
nand devnum = 0
SPI_ADDR_LEN=3
SF: Detected MX25U12835F with page size 256 Bytes, erase size 64 KiB, total 16 MiB
nand devnum = 1
ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x1000000
528 MiB
MMC: sdhci: Node Not found, skipping initialization
In: serial@78B1000
Out: serial@78B1000
Err: serial@78B1000
machid: 8030003
Net: MAC0 addr:0:3:7f:ba:db:ad
phy_chip_id: 0x4dd074 phy_id: 0
PHY ID1: 0x4d
PHY ID2: 0xd074
phy_chip_id: 0xffffffff phy_id: 1
phy_chip_id: 0xffffffff phy_id: 2
phy_chip_id: 0xffffffff phy_id: 3
phy_chip_id: 0xffffffff phy_id: 4
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
eth0
SPI_ADDR_LEN=3
SF: Detected MX25U12835F with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0x6a0000, size 0x7c
SF: 124 bytes @ 0x6a0000 Read: OK
device 0 offset 0x6a8000, size 0xd0
SF: 208 bytes @ 0x6a8000 Read: OK
Checking crashdump env: disabled
do_crashdump: u-boot crashdump disabled but crash happened in kernel. resetting...
resetting ...
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00098-IPQ60xxLZB-1
S - IMAGE_VARIANT_STRING=IPQ6018LA
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu121
S - Boot Interface: SPI
S - Secure Boot: Off
S - Boot Config @ 0x000a602c = 0x000002e1
S - JTAG ID @ 0x000a607c = 0x0013a0e1
S - OEM ID @ 0x000a6080 = 0x00000000
S - Serial Number @ 0x000a4128 = 0x674d8421
S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000a4130 = 0x0000000008000001
S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83383000009
S - PBL Patch Ver: 1
S - I-cache: On
S - D-cache: On
B - 3413 - PBL, Start
B - 592 - bootable_media_detect_entry, Start
B - 4339 - bootable_media_detect_success, Start
B - 4435 - elf_loader_entry, Start
B - 4607 - auth_hash_seg_entry, Start
B - 10853 - auth_hash_seg_exit, Start
B - 11348 - elf_segs_hash_verify_entry, Start
B - 357981 - elf_segs_hash_verify_exit, Start
B - 362171 - auth_xbl_sec_hash_seg_entry, Start
B - 362315 - auth_xbl_sec_hash_seg_exit, Start
B - 368867 - xbl_sec_segs_hash_verify_entry, Start
B - 368868 - xbl_sec_segs_hash_verify_exit, Start
B - 369798 - PBL, End
B - 296002 - SBL1, Start
B - 435814 - GCC [RstStat:0x2, RstDbg:0x420100] WDog Stat : 0x4
B - 438254 - clock_init, Start
D - 3751 - clock_init, Delta
B - 447831 - boot_flash_init, Start
D - 8082 - boot_flash_init, Delta
B - 458171 - sbl1_ddr_set_default_params, Start
D - 183 - sbl1_ddr_set_default_params, Delta
B - 464789 - boot_config_data_table_init, Start
D - 1891 - boot_config_data_table_init, Delta - (575 Bytes)
B - 473909 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:0,Subtype:3
B - 479460 - Image Load, Start
D - 6618 - OEM_MISC Image Loaded, Delta - (0 Bytes)
B - 488793 - Image Load, Start
D - 5063 - PMIC Image Loaded, Delta - (0 Bytes)
B - 496692 - sbl1_ddr_set_params, Start
B - 501603 - CPR configuration: 0x555
B - 504866 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 538386 - Image Load, Start
D - 518 - APDP Image Loaded, Delta - (0 Bytes)
B - 557235 - Image Load, Start
D - 518 - QTI_MISC Image Loaded, Delta - (0 Bytes)
B - 559736 - Image Load, Start
D - 854 - Auth Metadata
D - 732 - Segments hash check
D - 29249 - QSEE Dev Config Image Loaded, Delta - (36490 Bytes)
B - 590937 - Image Load, Start
D - 6649 - Auth Metadata
D - 10461 - Segments hash check
D - 814869 - QSEE Image Loaded, Delta - (1436620 Bytes)
B - 1406294 - Image Load, Start
D - 702 - Auth Metadata
D - 976 - Segments hash check
D - 63867 - RPM Image Loaded, Delta - (102800 Bytes)
B - 1471777 - Image Load, Start
D - 671 - Auth Metadata
D - 3202 - Segments hash check
D - 316224 - APPSBL Image Loaded, Delta - (566894 Bytes)
B - 1805508 - SBL1, End
D - 1509903 - SBL1, Delta
S - Flash Throughput, 1000 KB/s (2144051 Bytes, 1139168 us)
S - Core 0 Frequency, 800 MHz
S - DDR Frequency, 466 MHz
U-Boot 2016.01 (May 10 2021 - 08:31:12 -0700)
GD66 1.0.4.60.R350
DRAM: smem ram ptable found: ver: 2 len: 4
Ram top: 0x7d800000 Ram size: 0x3d800000
984 MiB
NAND: ONFI device found
ID = 1590ac01
Vendor = 1
Device = ac
vendor = 1 timing_parameters = 1
qpic_nand: changing oobsize to 64 from 128 bytes
nand devnum = 0
SPI_ADDR_LEN=3
SF: Detected MX25U12835F with page size 256 Bytes, erase size 64 KiB, total 16 MiB
nand devnum = 1
ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x1000000
528 MiB
MMC: sdhci: Node Not found, skipping initialization
In: serial@78B1000
Out: serial@78B1000
Err: serial@78B1000
machid: 8030003
Net: MAC0 addr:0:3:7f:ba:db:ad
phy_chip_id: 0x4dd074 phy_id: 0
PHY ID1: 0x4d
PHY ID2: 0xd074
phy_chip_id: 0xffffffff phy_id: 1
phy_chip_id: 0xffffffff phy_id: 2
phy_chip_id: 0xffffffff phy_id: 3
phy_chip_id: 0xffffffff phy_id: 4
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
eth0
SPI_ADDR_LEN=3
SF: Detected MX25U12835F with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0x6a0000, size 0x7c
SF: 124 bytes @ 0x6a0000 Read: OK
device 0 offset 0x6a8000, size 0xd0
SF: 208 bytes @ 0x6a8000 Read: OK
Checking crashdump env: disabled
No Himem Boot Script !!!
Checking auto/recovery boot
Booting image rcks_wlan.main (1) type:1/1 ...
Hit Ctrl-c to stop autoboot: 0
IPQ6018# <INTERRUPT>
IPQ6018# <INTERRUPT>
IPQ6018# <INTERRUPT>
IPQ6018#
IPQ6018# Vendor = 1
Unknown command 'Vendor' - try 'help'
IPQ6018# Device = ac
Unknown command 'Device' - try 'help'
IPQ6018#
Last edited:
