raid controller creating 2 partitions on a single drive help

[kaitlin4599]

so i have a dell perc H700 with a 3TB sas drive connected to my gaming pc. the perc H700 sees the drive and allows me to create a virtual disk using the full capacity of the drive, however when i initialize the drive windows 10 sees two separate partitions instead of a single partition with the full empty drive capacity im confused any help forgot to add the drive is in a RAID 0

 

[RAIDER]

You have initialized the drive as MBR and not GPT. MBR has a limit of 2048GB so you need to renitialize/convert as/to GPT.

 

[kaitlin4599]

You have initialized the drive as MBR and not GPT. MBR has a limit of 2048GB so you need to renitialize/convert as/to GPT.

i figured that was the issue