I'm new to this switch and networking and during my update of the firmware I thought I was deleting the old image but I ending up delete and flash to JFFS2.... Now I can't get to Onie or uboot.
Does anyone have a copy of this diagnostic file?
This is what i get:
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
Starting Diag. Mode...
SF: Detected W25Q256 with page size 4 KiB, total 32 MiB
32768 KiB W25Q256 at 0:0 is now current device
....................................................................................................................................................................................................................
....
................................................................................................................................................................................................................................................................
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-3.9.6
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 3306258 Bytes = 3.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02000000 ...
Image Name:
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 3331232 Bytes = 3.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
Booting using the fdt blob at 0xc00000
Uncompressing Kernel Image ... OK
Loading Ramdisk to 2fcd2000, end 2ffff4a0 ... OK
Loading Device Tree to 00ffa000, end 00fff7b3 ... OK
setup_arch: bootmem
mpc85xx_rdb_setup_arch()
arch: exit
pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
device tree node missing required elements
running project: ly9_p2020
Mounting /dev/mtdblock6 at /mnt/flash.
Mounting tmpfs at /mnt/application...done.
No diag image found, please download through tftp or other local storage.
Press <ENTER> to continue...
Does anyone have a copy of this diagnostic file?
This is what i get:
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
SPI U-Boot 2010.12 (Oct 06 2014 - 14:23:16)
Press Ctrl+D to enter diagnostic program ...
Starting Diag. Mode...
SF: Detected W25Q256 with page size 4 KiB, total 32 MiB
32768 KiB W25Q256 at 0:0 is now current device
....................................................................................................................................................................................................................
....
................................................................................................................................................................................................................................................................
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-3.9.6
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 3306258 Bytes = 3.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02000000 ...
Image Name:
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 3331232 Bytes = 3.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
Booting using the fdt blob at 0xc00000
Uncompressing Kernel Image ... OK
Loading Ramdisk to 2fcd2000, end 2ffff4a0 ... OK
Loading Device Tree to 00ffa000, end 00fff7b3 ... OK
setup_arch: bootmem
mpc85xx_rdb_setup_arch()
arch: exit
pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
device tree node missing required elements
running project: ly9_p2020
Mounting /dev/mtdblock6 at /mnt/flash.
Mounting tmpfs at /mnt/application...done.
No diag image found, please download through tftp or other local storage.
Press <ENTER> to continue...