QNAP Compatible Dual SFP+

[Eric Faden]

Anyone recommend a cheapish dual SFP+ PCIe card to put in my QNAP TVS-682? I have two Linux servers that are currently using single SFP+ to communicate and I would like to have them both direct wire to the QNAP. Thanks.

Sent from my Pixel XL using Tapatalk

 

[Eric Faden]

For reference was looking at the Mellanox Connect 2 or Chelsio... But can't figure out if they will work.

Sent from my Pixel XL using Tapatalk

 

[Netwerkz101]

Looks like it would take standard low profile cards according to QNAP's recommended list below.

Compatibility List - QNAP

Recommended
Expansion Card for TVS-682
Brand
Brand Model Specification Note
QNAP LAN-10G2T-U Dual-port 10 GbE network expansion card for rack mount model, low-profile bracket, cat6A cable
Emulex OCe11102-IM Dual port 10 Gigabit network adapter , short range optical cable
Emulex OCe11102-NX Dual port 10 Gigabit network adapter , SFP+ direct attach copper cable
Emulex Oce11102-NT Dual port 10 Gigabit network adapter, 10GBASE-T, cat6 cable
QNAP LAN-10G2SF-MLX Dual-port 10 Gigabit network adapter, SFP+ interface
QNAP LAN-40G2SF-MLX Dual port QSFP 40 Gigabit network adapter
Mellanox MCX311A-XCCT Dual port 10 Gigabit network adapter , SFP+ direct attach copper cable
Mellanox MCX313A-BCCT Network Interface Card 40/56GbE Single-Port QSFP
Mellanox MCX314A-BCCT Network Interface Card 40/56GbE Dual-Port QSFP
QNAP LAN-10G2T-X550 Dual-port 10 GbE network expansion card , cat6A cable
QNAP LAN-1G2T-I210 Dual-port 1 GbE network expansion card

 

[Patrick]

I used an Intel X520-da2 in one of their rack mount NAS units and it worked.

 

[Eric Faden]

Nice... I may try that. My plan was to get a two port for the QNAP and use the two single ports for my servers. Then use two direct attach cables to connect the servers to the Nas.

Sent from my Pixel XL using Tapatalk

 

[cesmith9999]

Qnap QM2-2P10G1T Dual NVMe M.2 22110/2280 PCIe SSD and single 10GBASE-T 10GbE network

Chris