Proxmox VE 4.0 and Intel Xeon D X552/X557-AT 10Gbase-T

[Patrick]

The Fremont lab now has 1x 2P E5 V3 and 3x Xeon D systems based on the Supermicro X10SDV-TLN4F. I was fairly surprised to see this come up:


Thank goodness!

 

[Patrick]

And since someone will likely need this:

root@fmt-pve-02:~# ethtool eth0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: Symmetric
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: on (auto)
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes
root@fmt-pve-02:~# ethtool eth1
Settings for eth1:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: Symmetric
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: off (auto)
        Supports Wake-on: d
        Wake-on: d
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: no
root@fmt-pve-02:~# ethtool eth2
Settings for eth2:
        Supported ports: [ TP ]
        Supported link modes:   1000baseT/Full
                                10000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseT/Full
                                10000baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: umbg
        Wake-on: g
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: no
root@fmt-pve-02:~# ethtool eth3
Settings for eth3:
        Supported ports: [ TP ]
        Supported link modes:   1000baseT/Full
                                10000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseT/Full
                                10000baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: umbg
        Wake-on: g
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: no
root@fmt-pve-02:~#

 

[WhiskeyAlphaRomeo]

Awesome. My X10SDV-TLN4F is arriving in a couple days. I knew that the divers had made it into the newer kernels, but expected to have to jump through some hoops to get this working with PVE.

 

[canta]

Linux Kernel 4.X ...

I had some video error on N3050 (baytrail D) on proxmox 3.4, the warning basically ... i915 driver does not support baytrail D :|

upgraded to proxmox 4. the video errors are gone, this seems i915 support newer SoC Intel embedded video.