Poweredge 6100 4 Node X23-SB

[au.to]

I bought this box not knowing the 2nd nics have no mac address I need two ports.

comes with 8 quad core 2.33
supermicro remote console modules (I purchased these and installed them)
2 extra motherboards (I thought the others may have been bad because of the mac address issue.)

highest offer gets it, I am located in Orange County CA

 

[Patrick]

Yikes, any more information on the mac address thing? Will add that to the forum post on the C6100. What kind of NICs are they?

 

[au.to]

Yikes, any more information on the mac address thing? Will add that to the forum post on the C6100. What kind of NICs are they?

basically the X23-SB were custom order, and the 2nd nic does not have a mac address so it has single internal nic. I didnt know this so I bought a few mobo, and they had same issue. After some research I found out they are single Intel nic.

 

[Patrick]

Very odd. So one Intel NIC one IPMI? Or did you add those after (seems like you did from the above.) Interesting that they would spec that way.

 

[TheBay]

How many physical ports?, if there enough you may be able to just flash the intel rom and mac. The PHY/Chipset might be on the board already, just have it's software crippled.

 

[au.to]

How many physical ports?, if there enough you may be able to just flash the intel rom and mac. The PHY/Chipset might be on the board already, just have it's software crippled.

They all have 2 nics might just be in the rom.

 

[au.to]

Yea I added the IPMI in the pci slot.

 

[au.to]

$400 just add memory and drives. Tested fully functional and included 8 cpu, and 2 extra mobo. Also included is 4 IPMI modules.

 

[Patrick]

Pretty rocking deal since I think that generation was lower power consumption.

 

[TheBay]

They all have 2 nics might just be in the rom.

Worth putting a pic up of the board on here, if all components present it can be flashed with a rom/mac.

 

[au.to]

Super Micro Computer, Inc. - Products | Motherboards | Xeon Boards | X7DWT