Omnios LX zone UDP forwarding

Discussion in 'Solaris, Nexenta, OpenIndiana, and napp-it' started by Bob T Penguin, Mar 25, 2020 at 12:05 PM.

  1. Bob T Penguin

    Bob T Penguin New Member

    Joined:
    Dec 16, 2015
    Messages:
    21
    Likes Received:
    1
    Hello everyone,
    I'm having problems configuring an application in an LX zone, I hope someone can help.
    I'm trying to get APC PowerChute UPS monitoring software working in an LX Zone.

    uname -a SunOS omniosceNUC 5.11 omnios-r151030-521a1fc4d1 i86pc i386 i86pc

    I've configured a VNIC for the zone, set up the LXzone and networking and got the software installed.
    The problem is the UPS sends a UDP broadcast packet to register itself with the monitoring application, but Omnios doesn't forward the UDP packet from primary NIC to the VNIC. I guess it's a routing problem but I don't know where to begin.
    I'd be grateful if anyone could help.
    Many thanks
    Bob

    Edit, I'm an idiot! typing error on the Network management card shared secret. I've been trying to find that for days!
    Admin - please delete this thread. Sorry for wasting everyones time.
     
    #1
    Last edited: Mar 26, 2020 at 7:04 AM
Similar Threads: Omnios zone
Forum Title Date
Solaris, Nexenta, OpenIndiana, and napp-it LX Zones in OmniOS for DLNA Server Nov 29, 2016
Solaris, Nexenta, OpenIndiana, and napp-it Running Plex in a zone under OmniOS (Performance Penalty?) Mar 3, 2016
Solaris, Nexenta, OpenIndiana, and napp-it AiO: ESXi, OmniOS, Napp-it on Ryzen 3rd gen Feb 28, 2020
Solaris, Nexenta, OpenIndiana, and napp-it OmniOS, Napp-it, smb share and ad local domain group Feb 25, 2020
Solaris, Nexenta, OpenIndiana, and napp-it Use SMB DFS with Solaris or OmniOS. Feb 24, 2020

Share This Page