I don't know if 1 cpu is supported. I am fairly certain it doesn't work with ES chips. Have you looked at the post snoop via IPMI?Is it possible to work with one CPU using MBD-H11DSi-NT-O rev 2? and how? I got no display
ThanksI don't know if 1 cpu is supported. I am fairly certain it doesn't work with ES chips. Have you looked at the post snoop via IPMI?
I am using AMD Epyc 7302if you use ES cpu, then you need 2 cpu;s.
but with retail cpu;s it should work with 1 cpu installed. install the cpu in the correct socket where as2500 is connected to. check the mainboard manual for block diagram
Thanks
I am not familiar with IPMI, so how can I enter IPMI without display