Canada [NEW LOT] ASROCK X7P-MB REV. 1.02 LGA3647 FPGA C626 SR3HH

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Alex0220

Active Member
Feb 13, 2021
176
43
28
Tried a second OCP NIC (CX3) and the result is the same, the board doesn't detect the card at all, tried changing bifurication and ASPM settings with no luck.
FYI the board needs a cmos reset every time you plug in something new.
 

applepi

Member
Jun 15, 2013
85
67
18
Seller refunded me and is shipping replacement board as OCP slot seemed bad.

Will update when I get new board.
 

TheBariBest

New Member
Apr 13, 2022
1
0
1
Listing is up here. Looking to get this as a cheap first LGA 3647 board for a guy who's lived on LGA-2011 for way too long. Might end up pairing it with a 8160 ES QKG9. Anyone know if that CPU will work on this board?
 

ijohnny

New Member
Jul 11, 2021
14
2
3
TheBariBest,帖子:333700,成员:42150 said:
清单在这里。希望把它作为一个便宜的第一块 LGA 3647 板,供一个在 LGA-2011 上生活太久的人使用。最终可能会将其与 8160 ES QKG9 配对。有谁知道那个CPU可以在这个板上工作吗?
[/引用]
○ok
 

applepi

Member
Jun 15, 2013
85
67
18
No luck with either OCP NIC in either mobo, never establishes a PCI-E LINK, tried changing a bunch of IIO settings but nothing seems to get it to establish a link. Also the main 16X slot is only establishing an 8X link with one of my CX4 cards.
 

Alex0220

Active Member
Feb 13, 2021
176
43
28
I don't know whats WRONG with this seller. They are out of the office basically every day.

They told me to send them the invoice from UPS(I sent the MB) back and that they will pay it.

They stopped answering.... 80 Euros for nothing.
 

MilkSupreme

New Member
Jun 5, 2020
2
0
1
Anyone able to figure out whether there are in fact power button headers on the board? Seems plugging and unplugging the power cable is an inconvenient way to power cycle it
 

applepi

Member
Jun 15, 2013
85
67
18
Anyone able to figure out whether there are in fact power button headers on the board? Seems plugging and unplugging the power cable is an inconvenient way to power cycle it
Press and hold the button on the rear to power cycle the box. short press just resets.
 
  • Like
Reactions: Vit K