Hello to all,
I tried to install a BMC firmware update on a HP Cloudline CL3150 the other day, but I had a timeout in the update process.
After I could no longer log on to the WEBui, I disconnected the server from the power, then the system would no longer boot.
I do not get a picture displayed, nor do I get on the BMC web interface.
Also the fans do not spin up anymore.
the bmc system pings after 2-3 minutes for 10-12 sec, and then nothing happens.
during this pingable phase, i tried to login with SSH, Telnet and FTP , Http, but it didn't work.
it is this server :
support.hpe.com
it is not an ILO IMPI, one of these generic ones
there are a dip switch, i tried servals constellations but no luck.
I would be really grateful for any tips.
I tried to install a BMC firmware update on a HP Cloudline CL3150 the other day, but I had a timeout in the update process.
After I could no longer log on to the WEBui, I disconnected the server from the power, then the system would no longer boot.
I do not get a picture displayed, nor do I get on the BMC web interface.
Also the fans do not spin up anymore.
the bmc system pings after 2-3 minutes for 10-12 sec, and then nothing happens.
during this pingable phase, i tried to login with SSH, Telnet and FTP , Http, but it didn't work.
it is this server :
Document Display | HPE Support Center
it is not an ILO IMPI, one of these generic ones
there are a dip switch, i tried servals constellations but no luck.
I would be really grateful for any tips.
