need help for a networking build

[carlos.gongora91]

hi guys i have a question..

if i buy this product WAX630E | Cloud Managed WiFi 6E Access Point | NETGEAR ......NetGear AXE7800 Tri-Band WiFi 6E Access Point...its say on the specifications

that power over PoE++.. My question its if i want to give power to this product over PoE cable witch "Switch" can do the Job ?? thank you for the help ..

 

[JJ27]

Look for "802.3bt" in the switch data sheet, or you could go with an injector if it's just for one device.

 

[Kolchak]

You can use a PoE+ AT (30W) switch port but the max throughput will reduce by 50% on 5GHz. I find this odd considering the power consumption (27.64W) is within the 30W AT standard. To fully utilize the AP you want a switch with 2.5Gb PoE++ BT ports will be needed, like the Netgear MS510TXUP.

 

[carlos.gongora91]

Look for "802.3bt" in the switch data sheet, or you could go with an injector if it's just for one device.

thanks for the help JJ27

 

[carlos.gongora91]

You can use a PoE+ AT (30W) switch port but the max throughput will reduce by 50% on 5GHz. I find this odd considering the power consumption (27.64W) is within the 30W AT standard. To fully utilize the AP you want a switch with 2.5Gb PoE++ BT ports will be needed, like the Netgear MS510TXUP.

thank for the help Kolchak