on supermicro boards all +12V inputs are shorted together.should i connect them all in order to boot?
thanks for the replyyou need 2x native EPS 8pins. do not use molex to 8pin. PCIe to EPS is good too.
i tried putting 4pins each on the 8pins and its still somehow not booting up.. i can login to the BMC panel but the power control doesnt work eithergb00s
has experience with this board, you may contact him if he don't see this thread.
you can split the 8pin and put each 4 pin in the 8pins to be sure both are supplied. good 600W PSU should be enough for one CPU without GPU.
CPU dead, wrong inserted, reseat CPU check for bent pins.i can login to the BMC panel but the power control doesnt work either
cpu was confirmed from the seller.CPU known working ? or bought as untested ?
motherboard new ? or unknown state ?
mmhhh. check socket, move board out of the case.motherboard is second handed
press the power button ?i can login to the BMC panel but the power control doesnt work either
thanks for the help!press the power button ?