This is writing to the data stores, vmotion also to data stores is also silly slow.Are you seeing this in the VM's or just writing to the datastore?
It should be a 4+2 config 2 for optical 4 for raid.Yeah this is ich10 chipset sata ports, how does one see.via the cli negotiated sata speed for device plugged into it.
Currently I have a ssd plugged in and see writes to it max out at 40Mbs which is very slow.
Event sata 1 would be 150 ish.
Maybe it's not even in ahci mode, no settings in bios I can find.
Seems odd to put six sata ports and hobble them for optical only.
Sent from my iPhone using Tapatalk
Document covers both if you read it, but evidently the 350 doesn't have it as an option. It has been awhile since I worked on something so ancient.Mate, it has a p410i controller and that's a sas controller. That's has a bunch 6 ( 300gb sas drives attached ) those are fine and raided.
It doesn't have no sata raid for the onboard motherboard ports of which there are six. There is no bios option or boot option that mentions the sata port settings.
Once again this is a ML350 G6, your document is for a 100 series...
The SSD connected to the onboard sata port is a crucial mx300 of 525mb.
Sent from my iPhone using Tapatalk
Thanks for your input, it's driving me nuts.
I'll try a window install bare metal and see if I still get slow speeds.
Might be a VMware quirk.
Sent from my iPhone using Tapatalk
Hello!Thanks for your input, it's driving me nuts.
I'll try a window install bare metal and see if I still get slow speeds.
Might be a VMware quirk.
Sent from my iPhone using Tapatalk