Minisforum MS-01 PCIe Card and RAM Compatibility Thread

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
@wadup I'm also having trouble getting vPro working. I can connect via a browser on port 16993 but can't get MeshCommander (using mesh-mini) to connect. It just times out. I'm using IP:16693 for hostname and Digest / TLS for Auth. Any ideas? The vPro page in the browser doesn't show Remote Control.
Hi.
1. Make sure you already enable MEBX in bios.
2. Make sure you enable vpro setting: "Network Active"
3. Make sure your management port is I226-LM(the rj45 next to SFP+)
Website access, suggestion input by your hand, https://[you-ip-address]:16993
By default the ip address of you manangement is same with you dhcp ip addr. In some case, if no any dhcp package let vpro get a ip. You need setting a ip by manually.
 
All the Dell 240w power supplies thati found are 19.5v... the machine needs 19v

19.5v and 20v are fine, they are basically the same. DC powered devices accept a small voltage range because voltages drop when the device draws power. As long as you stay within that range it's fine. However, it's always important to have fire alarm/suppression/escape tools close by regardless of what you're doing.

Make sure you get the right size barrel connector on the brick because most barrel adapters are rated for minimal amps. Pretty sure MS-01 uses a 5.5mm x 2.5mm DC barrel, but I don't have one in front of me yet so ymmv.

The SlimQ 240w is nice because it has a 5525 barrel port plus two USB PD ports so you can power your hungry mini off the barrel and a couple not so hungry devices using USB PD to DC cables.
 
Hi.
1. Make sure you already enable MEBX in bios.
2. Make sure you enable vpro setting: "Network Active"
3. Make sure your management port is I226-LM(the rj45 next to SFP+)
Website access, suggestion input by your hand, https://[you-ip-address]:16993
By default the ip address of you manangement is same with you dhcp ip addr. In some case, if no any dhcp package let vpro get a ip. You need setting a ip by manually.

I did all of that. I can access the webpage but there is no KVM/Remote Desktop option
vPro.png
 
So, after I little bit more digging, I tried to disable Efficiency core (via BIOS).
So now my Proxmox host run on only "12" core, but at least seems [finger crossed!] stable.
View attachment 34820

I'm able to run the Windows 11 VM which caused the crash before.

I'll keep you posted.

Nico
Did you install the most recent intel microcode? That supposedly helped with some issues with big/little cores and proxmox. Someone posted a craft computing YouTube link with it earlier in this thread.
 
I'm absolutely loving my 13900H with my QNAP TL-D800S so far!

I installed the PCIE card in just a couple minutes. I'm also using 96GB of RAM from the first comment on this thread :)

So far everything has been great. I'm running unraid (I still need to actually hang this rack)
 

Attachments

  • server1.jpg
    server1.jpg
    334.4 KB · Views: 231
  • server2.jpg
    server2.jpg
    374.1 KB · Views: 227
I also have MS-01(13900H) running proxmox with 96GB memory from crucial like yours (just not kit bought 2 48GB separately because it was cheaper) and i also have the same problem but my server behaves normally. I do not experience random reboots or anything. I just see the errors. I tried memtest86+, tried unplugging external devices and I tried running single ram (tried each ram) and not running any vm at all. But i still see the errors still. I also tried updaating and dowgrading the kernel but it made it just worse! Like i saw Memory failure every second! That was teribble! Running kernel 5.15.136-1-pve i see the error only every minute. Maybe someone else can help? For me it would be enough to see any reponse that you are running MS-01 with 96GB crucial and it is working without the hardware or memory error. I also want to know if you are seeing the errors. Just want to know exactly if this is normal behavior or not. I would be really happy for any help. :) I see this:

View attachment 34805

@JaxJiang is this a normal behavior for this setup? Could you please verify. Maybe you have any solutions or suggestion? Thanks you
 
I'm absolutely loving my 13900H with my QNAP TL-D800S so far!

I installed the PCIE card in just a couple minutes. I'm also using 96GB of RAM from the first comment on this thread :)

So far everything has been great. I'm running unraid (I still need to actually hang this rack)

What is that server rack, I want one :)
 
So, after I little bit more digging, I tried to disable Efficiency core (via BIOS).
So now my Proxmox host run on only "12" core, but at least seems [finger crossed!] stable.
View attachment 34820

I'm able to run the Windows 11 VM which caused the crash before.

I'll keep you posted.

Nico

So, no reboot or crash so far.
Can anyone explain to me if running it with E-cores disabled is a real under power unit? I mean performance wise.

Thank you
Nico
 
Jaxjiang replied here for the hardware problem of the memory and some other info also.

Seems no biggy but it seems there is a newer hardware revision of MS-01, i hope he will reply which is which to know what revision we have.
With the above info in mind, maybe this is the reason that some cards refuse to work in the STH tests and to other people so a tape must be inserted in the specific PCI-E smbus pins to circumvent the problem
 
19.5v and 20v are fine, they are basically the same. DC powered devices accept a small voltage range because voltages drop when the device draws power. As long as you stay within that range it's fine. However, it's always important to have fire alarm/suppression/escape tools close by regardless of what you're doing.

Make sure you get the right size barrel connector on the brick because most barrel adapters are rated for minimal amps. Pretty sure MS-01 uses a 5.5mm x 2.5mm DC barrel, but I don't have one in front of me yet so ymmv.

The SlimQ 240w is nice because it has a 5525 barrel port plus two USB PD ports so you can power your hungry mini off the barrel and a couple not so hungry devices using USB PD to DC cables.

Minisforum support said MS-01 barrel port is 5.5mm x 2.5mm.
 
So, no reboot or crash so far.
Can anyone explain to me if running it with E-cores disabled is a real under power unit? I mean performance wise.

Thank you
Nico
The internets says that an E core has approximately 60% of the performance of a P core. So by disabling those 8 E cores you're losing performance in the neighborhood of 4-5 P cores. So you're definitely getting a lot less performance than you paid for. Your issues sound very much like the microcode issue described here by Craft Computing. The solution is described there as well. Credit to @GreenAvacado for linking the vid earlier in the thread.

I'm very interested in hearing whether the microcode update improves your experience because I plan to run proxmox on mine and losing the E-cores (or experiencing persistent stability issues) would definitely ruin a lot of the appeal of this box for me.
 
Last edited:
  • Like
Reactions: GreenAvacado
I'm absolutely loving my 13900H with my QNAP TL-D800S so far!

I installed the PCIE card in just a couple minutes. I'm also using 96GB of RAM from the first comment on this thread :)

So far everything has been great. I'm running unraid (I still need to actually hang this rack)

MS-01 Is such a good Unraid server coupled with your Qnap Expansion which is really smart. QNAP with MS-01 hardware would be many thousands of dollars and a lot bigger footprint.
 
Ok I got also AMT to works, still need to test KVM.

just two questions:

- under Proxmox, if using same Ethernet card that runs both management and AMT, using Linux bridge, start flooding the dmesof address spoofing (because AMT and Proxmox share same MAC address but different IP). Any solution on this?

- still under Proxmox (based on Debian 12 with kernel 6.2), a power off doesn’t shutdown the unit. Any suggestion?

thanks
 
The internets says that an E core has approximately 60% of the performance of a P core. So by disabling those 8 E cores you're losing performance in the neighborhood of 4-5 P cores. So you're definitely getting a lot less performance than you paid for. Your issues sound very much like the microcode issue described here by Craft Computing. The solution is described there as well. Credit to @GreenAvacado for linking the vid earlier in the thread.

I'm very interested in hearing whether the microcode update improves your experience because I plan to run proxmox on mine and losing the E-cores (or experiencing persistent stability issues) would definitely ruin a lot of the appeal of this box for me.

As I said earlier in the thread, I've already applied the latest microcode update :/
1708535870947.png
 
Anyone know if something like this would fit/work? Guessing it may not fit however still waiting on my pre-order so if someone could confirm if there's any space above the m2 slots to work with that'd be great, tia

713yzDVEDtL._AC_SL1500_.jpg
 
Anyone know if something like this would fit/work? Guessing it may not fit however still waiting on my pre-order so if someone could confirm if there's any space above the m2 slots to work with that'd be great, tia

713yzDVEDtL._AC_SL1500_.jpg
Not going to fit.