I have an X11SCH-F motherboard that is showing some ECC errors in the edac utility. Is there a straight forward way to map the below values to physical DIMM slots on the board so I know which module to attempt to replace? This is a 4 slot board running a Xeon E-2288G.
Code:
# edac-util -v
mc0: 0 Uncorrected Errors with no DIMM info
mc0: 0 Corrected Errors with no DIMM info
mc0: csrow0: 0 Uncorrected Errors
mc0: csrow0: mc#0csrow#0channel#0: 0 Corrected Errors
mc0: csrow0: mc#0csrow#0channel#1: 0 Corrected Errors
mc0: csrow1: 0 Uncorrected Errors
mc0: csrow1: mc#0csrow#1channel#0: 0 Corrected Errors
mc0: csrow1: mc#0csrow#1channel#1: 0 Corrected Errors
mc0: csrow2: 0 Uncorrected Errors
mc0: csrow2: mc#0csrow#2channel#0: 0 Corrected Errors
mc0: csrow2: mc#0csrow#2channel#1: 4 Corrected Errors
mc0: csrow3: 0 Uncorrected Errors
mc0: csrow3: mc#0csrow#3channel#0: 0 Corrected Errors
mc0: csrow3: mc#0csrow#3channel#1: 0 Corrected Errors