M1015 UEFI flash help

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.


New Member
May 18, 2011
I have two M1015 cards flashed with P15 in IT mode running in a
X9SCL-F MB. When I originally flashed these years ago I did so using dos in a different MB.

I want to upgrade these to P19, still using IT mode and with the OptionsROM.

1. Can I use UEFI to update both cards (individually) without having to open the case to remove them? If so, what are the commands to do so if the process is different than the typical efi flash.

2. Is the megarec command needed in an upgrade?