Just saw this GIANT multi-MXM GPU while at a local recycler...

[Prophes0r]

I was at my local recycler and they had this giant....thing on their desk.

They sell on ebay and already had the pictures so I'll just link the sale.
HP 716553-001, 3 x P1044 MXM PCIe Gen8 Graphics Card | eBay

This thing is a carrier board with 3x MXM GPUs on it.
And a PCIe switch?

It's hilariously big.
I figured quite a few of you would get a good laugh at it.

 

[pimposh]

SLI setup without SLI setup.

 

[Wasmachineman_NL]

Wonder what GPUs this board has?

 

[pimposh]

Wonder what GPUs this board has?

Quadro 3000M worth of fish'n'chips or frikandelbroodje.

 

[Wasmachineman_NL]

Quadro 3000M worth of fish'n'chips or frikandelbroodje.

hey that's the same GPU I had in a M6600

 

[nasbdh9]

during the vdi craze, a gen8/gen9 blades was equipped with one or two MXM-style graphics cards, which were eventually replaced by vgpu and became electronic garbage.

 

[Demopans]

This is a bit of a necro, but since I went ahead with one of these big ass cards, I might as well show that it kinda works

(images linked due to size constraints)

rn image picker lib temp 72a220e1 c27e 4e37 b4c1 b4d0b149eaa0 hosted at ImgBB

Image rn image picker lib temp 72a220e1 c27e 4e37 b4c1 b4d0b149eaa0 in the Demopans's images album

ibb.co

rn image picker lib temp 35830947 26d8 4b85 ade9 22b59f60e601 hosted at ImgBB

Image rn image picker lib temp 35830947 26d8 4b85 ade9 22b59f60e601 in the Demopans's images album

ibb.co

The MXM switch works. I just don't have the right drivers for the GPUs on the switch at the moment
And yes, I did swap the proprietary 8 pin power plug for a 6 pin that matches on a voltage basis

 

[Greg_E]

And yes, I did swap the proprietary 8 pin power plug for a 6 pin that matches on a voltage basis

Proprietary has nothing on a soldering iron! Done more than a few hacks on hardware to make them work with what I have at hand.