Guys, I was wondering if you could give me a hand with my configuration?
I have a Voltaire 4036, I got it up and running with IPoIB, just fine, but I would like to setup SRP since everyone seems to mention it is getting better performance.
I am using the 1.8.2.4 OFED drivers on VMware 6 side, and I am using OSNexus/QuantaStor on the storage side.
I got the iSCSI up fairly easy as I am more familiar with this, however I cannot seem to get it to be recognized by the Storage Adapter in VMWare, which I will assume is going to be the SRP side?
I believe it may have something to do with Hosts initiator config with QuantaStor, it seems to be asking for the following:
FC Initiator WWPN or IB GID: 00:00:00:00:00:00:00:00
So, I checked the logs inside of OSNEXUS, and I can see things like this:
kern.log:Jul 25 17:01:50 quantastor kernel: [ 0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
kern.log:Jul 25 17:01:50 quantastor kernel: [ 7.108454] scst: Target fe80:0000:0000:0000:0002:c903:000d:d19b for template ib_srpt registered successfully
kern.log:Jul 25 17:01:50 quantastor kernel: [ 7.108754] scst: Target fe80:0000:0000:0000:0002:c903:000d:d19c for template ib_srpt registered successfully
kern.log:Jul 25 17:02:30 quantastor kernel: [ 46.521085] ib_srpt: Received SRP_LOGIN_REQ with i_port_id 8102:c903:000d:d19b:0002:c903:000d:d543, t_port_id 0002:c903:000d:d19a:0002:c903:000d:d19a and
it_iu_len 580 on port 1 (guid=fe80:0000:0000:0000:0002:c903:000d:d19b)
kern.log:Jul 25 17:02:30 quantastor kernel: [ 46.521097] ib_srpt: rejected SRP_LOGIN_REQ because target fe80:0000:0000:0000:0002:c903:000d:d19b is not enabled
kern.log:Jul 25 17:02:43 quantastor kernel: [ 60.169707] scst: Using autogenerated relative target id 1 for target fe80:0000:0000:0000:0002:c903:000d:d19b
kern.log:Jul 25 17:02:43 quantastor kernel: [ 60.169714] ib_srpt: Enabling target fe80:0000:0000:0000:0002:c903:000d:d19b
kern.log:Jul 25 17:02:43 quantastor kernel: [ 60.169867] scst: Using autogenerated relative target id 2 for target fe80:0000:0000:0000:0002:c903:000d:d19c
kern.log:Jul 25 17:02:43 quantastor kernel: [ 60.169869] ib_srpt: Enabling target fe80:0000:0000:0000:0002:c903:000d:d19c
kern.log:Jul 25 17:03:30 quantastor kernel: [ 106.533200] ib_srpt: Received SRP_LOGIN_REQ with i_port_id 8102:c903:000d:d19b:0002:c903:000d:d543, t_port_id 0002:c903:000d:d19a:0002:c903:000d:d19a and
it_iu_len 580 on port 1 (guid=fe80:0000:0000:0000:0002:c903:000d:d19b)
kern.log:Jul 25 17:03:30 quantastor kernel: [ 106.536558] scst: Using security group "fe80:0000:0000:0000:0002:c903:000d:d19b" for initiator "fe80:0000:0000:0000:0002:c903:000d:d543" (target fe80:000
0:0000:0000:0002:c903:000d:d19b)
kern.log:Jul 25 17:11:30 quantastor kernel: [ 586.607858] ib_srpt: Received SRP_LOGIN_REQ with i_port_id 8102:c903:000d:d19c:0002:c903:000d:d543, t_port_id 0002:c903:000d:d19a:0002:c903:000d:d19a and
it_iu_len 580 on port 2 (guid=fe80:0000:0000:0000:0002:c903:000d:d19c)
kern.log:Jul 25 17:11:30 quantastor kernel: [ 586.611142] scst: Using security group "fe80:0000:0000:0000:0002:c903:000d:d19c" for initiator "fe80:0000:0000:0000:0002:c903:000d:d543" (target fe80:000
0:0000:0000:0002:c903:000d:d19c)
kern.log:Jul 25 17:21:55 quantastor kernel: [ 1211.701682] ib_srpt: Received SRP_LOGIN_REQ with i_port_id 8102:c903:000d:d19c:0002:c903:000d:d543, t_port_id 0002:c903:000d:d19a:0002:c903:000d:d19a and
it_iu_len 580 on port 2 (guid=fe80:0000:0000:0000:0002:c903:000d:d19c)
kern.log:Jul 25 17:21:55 quantastor kernel: [ 1211.704996] scst: Using security group "fe80:0000:0000:0000:0002:c903:000d:d19c" for initiator "fe80:0000:0000:0000:0002:c903:000d:d543" (target fe80:000
0:0000:0000:0002:c903:000d:d19c)
kern.log:Jul 25 17:21:55 quantastor kernel: [ 1211.705101] ib_srpt: Relogin - closed existing channel fe80:0000:0000:0000:0002:c903:000d:d543
kern.log:Jul 25 17:21:55 quantastor kernel: [ 1211.705161] ib_srpt: Received CM DREP message for ch fe80:0000:0000:0000:0002:c903:000d:d543.
kern.log:Jul 25 17:25:55 quantastor kernel: [ 1451.723093] ib_srpt: Received SRP_LOGIN_REQ with i_port_id 8102:c903:000d:d19b:0002:c903:000d:d543, t_port_id 0002:c903:000d:d19a:0002:c903:000d:d19a and
it_iu_len 580 on port 1 (guid=fe80:0000:0000:0000:0002:c903:000d:d19b)
kern.log:Jul 25 17:25:55 quantastor kernel: [ 1451.726462] scst: Using security group "fe80:0000:0000:0000:0002:c903:000d:d19b" for initiator "fe80:0000:0000:0000:0002:c903:000d:d543" (target fe80:000
0:0000:0000:0002:c903:000d:d19b)
I tried adding: fe80:0000:0000:0000:0002:c903:000d:d543 to the hosts initiator config inside of QuantaStor, however after refreshing the storage controllers inside of VMware, still can't see any Targets/Paths/Devices
Any comments/ideas?