Hi all,
I bought 2 of these on eBay from the same guy. One has an NVME namespace defined (/dev/nvme2n1) and looks OK. The other one (/dev/nvme1) does NOT have a namespace. Following a few guides trying to create a namespace does not work -- I get an error (I don't have the drive infront of me, but when I do I'll update this post). smartctl --all show the total namespace as only 69.7GB as well. Is this drive borked? Does it simply need a firmware update?
Anyone have experience with these drives?
Edit: some more info:
using solidigm sst tool:
I bought 2 of these on eBay from the same guy. One has an NVME namespace defined (/dev/nvme2n1) and looks OK. The other one (/dev/nvme1) does NOT have a namespace. Following a few guides trying to create a namespace does not work -- I get an error (I don't have the drive infront of me, but when I do I'll update this post). smartctl --all show the total namespace as only 69.7GB as well. Is this drive borked? Does it simply need a firmware update?
Anyone have experience with these drives?
Edit: some more info:
using solidigm sst tool:
Code:
Bootloader : 0104
Capacity : 69.79 GB (69,793,218,560 bytes)
DevicePath : /dev/nvme1
DeviceStatus : ASSERT_100C7790
Firmware : QDV1013D
FirmwareUpdateAvailable : Please contact Customer Support for further assistance at the following website: https://www.solidigm.com/support-page.html.
Index : 1
ModelNumber : INTEL SSDPE2KE032T7
NamespaceId : 4294967295
ProductFamily : Intel SSD DC P4600 Series
SMARTEnabled : True
SectorDataSize : 512
Code:
# sst load -ssd <SN>
WARNING! You have selected to update the drives firmware!
Proceed with the update? (Y|N): Y
Checking for firmware update...
- Intel SSD DC P4600 Series <SN> -
Status : Selected drive is in a disable logical state.
Last edited: