Try:
megarec -cleanflash 0
reboot
megarec -m0flash 0 imr_fw.rom (make sure you have the IBM Firmware)
The SBR should be fixed once the FW starts to update.
If this don't work then you are going to have some difficulties
'APP' is the actual FW of the M1015 that is having issues.
Mine has a manufacture date of 2011-08-25 so I doubt its a revision problem.
2nd sticker for me says: LSISAS-9240-8i(B) so we have the same card, I had no issues doing what you started to do
SAS2flash and SAS2flsh are not available while the card is still a M1015
These become available once the FW is erased, but your's is stuck doing this.
megarec -cleanflash 0
reboot
megarec -m0flash 0 imr_fw.rom (make sure you have the IBM Firmware)
The SBR should be fixed once the FW starts to update.
If this don't work then you are going to have some difficulties
'APP' is the actual FW of the M1015 that is having issues.
Mine has a manufacture date of 2011-08-25 so I doubt its a revision problem.
2nd sticker for me says: LSISAS-9240-8i(B) so we have the same card, I had no issues doing what you started to do
SAS2flash and SAS2flsh are not available while the card is still a M1015
These become available once the FW is erased, but your's is stuck doing this.
Last edited: