Hello, I have a HPE ml10 gen9 and wanted to install about 5 hdd (2TB each) in it in RAID 5, but with the onboard raid in the bios, ESXI or Proxmox does not recognize the RAID array.
I bought the HP smart array P420 thinking it will work but I am not able to enter in the RAID controller bios, it shows the initializing with **** and afther that it shows 0 logical drives and goes to the main bios screen.
In the HPE ml10 gen9 bios I have csm support enabled with boot option filter = legacy only.
Thanks in advance.
Best regards
Eduard Toma
I bought the HP smart array P420 thinking it will work but I am not able to enter in the RAID controller bios, it shows the initializing with **** and afther that it shows 0 logical drives and goes to the main bios screen.
In the HPE ml10 gen9 bios I have csm support enabled with boot option filter = legacy only.
Thanks in advance.
Best regards
Eduard Toma