I'm moving all storage servers from 2011-3 to SP3 & 3647 platforms. I had several HP H240 HBAs working in Supermicro X10SRi-L and X1-SRH-CF motherboards. I moved all the cards to the 'new' storage servers and they all decided to not be in love with any X11/H11/H12 motherboards. I always get the following error message while booting up the machines:
Ignoring the error just leads to a boot loop. Nothing else is going on then. I re-checked BIOS settings and failed to find any obvious configuration that shall fail. While the rom of the card is booting before any boot device is selected, I had to swap the cards out again into the old platform in order to check settings there.
Has somebody an idea why these cards behave like that on X11/H11/H12 Supermicro boards?
Ignoring the error just leads to a boot loop. Nothing else is going on then. I re-checked BIOS settings and failed to find any obvious configuration that shall fail. While the rom of the card is booting before any boot device is selected, I had to swap the cards out again into the old platform in order to check settings there.
Has somebody an idea why these cards behave like that on X11/H11/H12 Supermicro boards?