Today my HP221 arrived and after some Research and trying i get it now.
Problem is, the sticker on the controller tells us it is an 9207-8e controller, but when u try to flash 9207 Firmware u get an Chipset Revision Error.
This is just false, the boards with the older REV Chipsets are 9205-8e Controllers(its the same Board with old REV Chipset).
When u now try to flash the 9205-8e it firmware u get an NVdata Subsystem mismatch Error.
Just use an older sas2flash Version(lower 15, i used 14), and it will not test for this.
My H221 flashed to 9205-8e is fully working connected to Intel SAS Expander.
So to sum it up, just get 9205-8e(its under Legacy Host Bus Adapters) firmware and flash it with sas2flash version > 15.
MFG jasch
Problem is, the sticker on the controller tells us it is an 9207-8e controller, but when u try to flash 9207 Firmware u get an Chipset Revision Error.
This is just false, the boards with the older REV Chipsets are 9205-8e Controllers(its the same Board with old REV Chipset).
When u now try to flash the 9205-8e it firmware u get an NVdata Subsystem mismatch Error.
Just use an older sas2flash Version(lower 15, i used 14), and it will not test for this.
My H221 flashed to 9205-8e is fully working connected to Intel SAS Expander.
So to sum it up, just get 9205-8e(its under Legacy Host Bus Adapters) firmware and flash it with sas2flash version > 15.
Code:
sas2flash -o -f 9205-8e.bin