Hi,
We have a Mellanox SX6036 switch with ethernet support. Currently, we want to increase the receiving buffer of ports by tuning Xon/Xoff threshold. Some guides in internet metioned "ingress-buffer" and "egress-buffer" commands, but it seems that SX6036 does not have these commands. The switch info:
Eth mode is used.
Edit: In MLNX-OS manual, many sections are specific to spectrum-based switch. Does it mean SwitchX serial switches doesn't support config Xon/Xoff threshold?
We have a Mellanox SX6036 switch with ethernet support. Currently, we want to increase the receiving buffer of ports by tuning Xon/Xoff threshold. Some guides in internet metioned "ingress-buffer" and "egress-buffer" commands, but it seems that SX6036 does not have these commands. The switch info:
Code:
Product name: MLNX-OS
Product release: 3.6.8012
Build ID: #1-dev
Build date: 2019-02-22 07:53:42
Target arch: ppc
Target hw: m460ex
Built by: jenkins
Version summary: PPC_M460EX 3.6.8012 2019-02-22 07:53:42 ppc
Product model: ppc
Host ID: 248A0717B434
Uptime: 3d 23h 34m 46.848s
CPU load averages: 3.27 / 2.60 / 2.54
Number of CPUs: 1
System memory: 797 MB used / 1230 MB free / 2027 MB total
Swap: 0 MB used / 0 MB free / 0 MB totalEdit: In MLNX-OS manual, many sections are specific to spectrum-based switch. Does it mean SwitchX serial switches doesn't support config Xon/Xoff threshold?
Last edited: