thank goodness... i was so tempted to pickup 26 of these and a another 24x bay server with SAS3. i was waiting for you guys spend your money so i wouldn't....And they're gone!
thank goodness... i was so tempted to pickup 26 of these and a another 24x bay server with SAS3. i was waiting for you guys spend your money so i wouldn't....And they're gone!
I lined up UStoOZ to buy/ship on my behalf but it looks like they didn’t do it before they ran out.You could use a USA freight forwarding service like Shipto or MyUsa or others and ship them to a USA mailbox. Only problem is if you have to return drives to USA and freight forwarders will need to unpack drives (static charge potential) to take pictures if you want goods insurance. Hopefully they are packaged in clear anti static bags. There is a thread here about freight forwarding l started in this Deals thread. Sorry l'm on mobile or l'd look it up for you.
Which server would you get to run this if you bought them?thank goodness... i was so tempted to pickup 26 of these and a another 24x bay server with SAS3. i was waiting for you guys spend your money so i wouldn't....
Lol this is my life on "Great Deals", constantly toggling between 2 emotions of "Dang missed that hot deal, " and "Thank god that's all gone, dodged a bullet to wallet "Aww, way too late for me and I almost bought from the sneaky ebay "listing out we found a similar for you" seller with people stating hit and miss drives...
Anyway thanks for the wallet save
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUSMM8040ASS205
Revision: D252
Compliance: SPC-4
User Capacity: 400,088,457,216 bytes [400 GB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is resource provisioned, LBPRZ=1
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Logical Unit id:
Serial number:
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Aug 1 19:14:39 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Percentage used endurance indicator: 0%
Current Drive Temperature: 24 C
Drive Trip Temperature: 70 C
Manufactured in week 04 of year 2015
Specified cycle count over device lifetime: 0
Accumulated start-stop cycles: 0
Specified load-unload count over device lifetime: 0
Accumulated load-unload cycles: 0
defect list format 6 unknown
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 6401917190144
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 401.104 0
write: 0 0 0 0 0 800.177 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 18 - [- - -]
Long (extended) Self Test duration: 2774 seconds [46.2 minutes]
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUSMM8040ASS205
Revision: D252
Compliance: SPC-4
User Capacity: 400,088,457,216 bytes [400 GB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is resource provisioned, LBPRZ=1
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Logical Unit id:
Serial number:
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Aug 1 19:51:45 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
Read Cache is: Enabled
Writeback Cache is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Percentage used endurance indicator: 0%
Current Drive Temperature: 26 C
Drive Trip Temperature: 70 C
Manufactured in week 04 of year 2015
Specified cycle count over device lifetime: 0
Accumulated start-stop cycles: 0
Specified load-unload count over device lifetime: 0
Accumulated load-unload cycles: 0
defect list format 6 unknown
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 6401917190144
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 801.195 0
write: 0 0 0 0 0 800.177 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 18 - [- - -]
Long (extended) Self Test duration: 2774 seconds [46.2 minutes]
Background scan results log
Status: no scans active
Accumulated power on time, hours:minutes 18:37 [1117 minutes]
Number of background scans performed: 0, scan progress: 0.00%
Number of background medium scans performed: 0
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 1
number of phys = 1
phy identifier = 0
attached device type: expander device
attached reason: SMP phy control function
reason: unknown
negotiated logical link rate: phy enabled; 6 Gbps
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=1
SAS address =
attached SAS address =
attached phy identifier = 14
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 2
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 2
Phy reset problem count: 0
relative target port id = 2
generation code = 1
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: power on
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address =
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
Wow.. only about 18 hours of use? Practically brand new...@BLinux Certainly!
I initiated a complete read of the drive after my last post, power-cycled, and this time the "Gigabytes processed" saved. I'll dig around some more, but that was definitely kind of strange that it didn't seem to be saving!Code:smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HGST Product: HUSMM8040ASS205 Revision: D252 Compliance: SPC-4 User Capacity: 400,088,457,216 bytes [400 GB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is resource provisioned, LBPRZ=1 Rotation Rate: Solid State Device Form Factor: 2.5 inches Logical Unit id: Serial number: Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Wed Aug 1 19:51:45 2018 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled Read Cache is: Enabled Writeback Cache is: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Percentage used endurance indicator: 0% Current Drive Temperature: 26 C Drive Trip Temperature: 70 C Manufactured in week 04 of year 2015 Specified cycle count over device lifetime: 0 Accumulated start-stop cycles: 0 Specified load-unload count over device lifetime: 0 Accumulated load-unload cycles: 0 defect list format 6 unknown Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 6401917190144 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 0 0 0 0 801.195 0 write: 0 0 0 0 0 800.177 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed - 18 - [- - -] Long (extended) Self Test duration: 2774 seconds [46.2 minutes] Background scan results log Status: no scans active Accumulated power on time, hours:minutes 18:37 [1117 minutes] Number of background scans performed: 0, scan progress: 0.00% Number of background medium scans performed: 0 Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 1 number of phys = 1 phy identifier = 0 attached device type: expander device attached reason: SMP phy control function reason: unknown negotiated logical link rate: phy enabled; 6 Gbps attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=1 SAS address = attached SAS address = attached phy identifier = 14 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 2 Phy reset problem = 0 Phy event descriptors: Invalid word count: 0 Running disparity error count: 0 Loss of dword synchronization count: 2 Phy reset problem count: 0 relative target port id = 2 generation code = 1 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: power on negotiated logical link rate: phy enabled; unknown attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 0 Phy reset problem = 0 Phy event descriptors: Invalid word count: 0 Running disparity error count: 0 Loss of dword synchronization count: 0 Phy reset problem count: 0
Definitely seems like it!Wow.. only about 18 hours of use? Practically brand new...
Hmmm...Finally got around to benchmarking these. Quick and dirty benchmark on a RAID 0 of 8x of these. Connected to an Adaptec 8885e HBA (12gbps per port, connected via breakout cables, no expander) on a PCI-e 3.0 x8 slot). Standard Windows RAID.
View attachment 9068
Will be doing fine tuning in the next few days.