HI
Really dumb question. I have a 3U SM chassis with SAS2-836EL1. I'm using a X10DRi-T motherboard. I want to connect the backplane to my HBA HP220 which is in IT mode.
The chassis came with a CBL-00117-01-A-R but it has a different end connector not compatible with the HP 220.
I bought two 8087 to 8087 cables which I think will do the trick. Which ports in the diagram above do I use for the two 8087 to 8087 cables? The CBL-00117-01-A-R came plugged into #7.
Second dumb question - There is CBL-00129-01-A-R connected to the 2.5 HDDs bays under the PSUs. Do I plug that in to a slot on the MB? Will that cable get me SSD SATA3 speed or better to swap out to a ??
Thanks
Really dumb question. I have a 3U SM chassis with SAS2-836EL1. I'm using a X10DRi-T motherboard. I want to connect the backplane to my HBA HP220 which is in IT mode.
The chassis came with a CBL-00117-01-A-R but it has a different end connector not compatible with the HP 220.
I bought two 8087 to 8087 cables which I think will do the trick. Which ports in the diagram above do I use for the two 8087 to 8087 cables? The CBL-00117-01-A-R came plugged into #7.
Second dumb question - There is CBL-00129-01-A-R connected to the 2.5 HDDs bays under the PSUs. Do I plug that in to a slot on the MB? Will that cable get me SSD SATA3 speed or better to swap out to a ??
Thanks