Was previously rocking the 2.5Gb realtek, working fine. I can see both the stock i219 and realtek in bios -> UEFI Drivers-> 3rd parth option rom management ->Devices list, and in proxmox network tab
Putting in the Marvell 10Gb flex IO, got it from BH, only the i219 shows up in the above bios menu, booted into proxmox, not in the network devices list, plug in the ethernet cable, no link light. Double checked the connection by reseating the io board, still nothing.
Then I took out the board, and put in my prodesk 600 G6, somehow that showed up.
Is the board no meant to be used in 800 G9 mini?
Is there anything special needs to be done in proxmox or HP BIOS? I don't see anything can be change in the bios.
Thanks for the help.
Putting in the Marvell 10Gb flex IO, got it from BH, only the i219 shows up in the above bios menu, booted into proxmox, not in the network devices list, plug in the ethernet cable, no link light. Double checked the connection by reseating the io board, still nothing.
Then I took out the board, and put in my prodesk 600 G6, somehow that showed up.
Is the board no meant to be used in 800 G9 mini?
Is there anything special needs to be done in proxmox or HP BIOS? I don't see anything can be change in the bios.
Thanks for the help.
Last edited: