Help Needed on EX3300 Juniper

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
K

kirlcheah

Member
Jan 24, 2015
65
2
8
41
Hi,

I have an error on my Juniper.
LED:Alarm Speed 3. When login to the management console, will need to reload because it have error on the primary Junos.

--- JUNOS 13.2X50-D19.2 built 2014-05-20 02:56:07 UTC

***********************************************************************
** **
** WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE **
** **
** It is possible that the primary copy of JUNOS failed to boot up **
** properly, and so this device has booted from the backup copy. **
** **
** Please re-install JUNOS to recover the primary copy in case **
** it has been corrupted and if auto-snapshot feature is not **
** enabled. **
** **
***********************************************************************
When trying to download, i can't get this copy of the switch image.
Anyone can help to download and send this to me??
Appreciate this if you can share it somewhere.

EX3300 Series15.1R7.905 Oct 2018tgz (119.44MB)
 
R

Roelf Zomerman

Active Member
Jan 10, 2019
147
27
28
blog.azureinfra.com
K

kirlcheah

Member
Jan 24, 2015
65
2
8
41
Roelf Zomerman said:
you essentially have a primary boot option and a backup boot option.. both have their own image and configuration.. it seems you primary is non functional, or you have forced it to boot into backup..

even when in the backup image, you can fix this easily by cloning the backup to the primary:
[EX] Switch boots from backup root partition after file system corruption occurred on the primary root partition - Juniper Networks
Click to expand...
thanks. got it fixed, but still would there be anyone who can send me the file to upgrade the switch? feeling hopeful...
 
You must log in or register to reply here.
Top Bottom