MB : (New) Supermicro H12SSL-CT-B v1.02
CPU : (New) Epyc 7282
Ram : (New) NEMIX MR25600-628 16GB PC4-3200 2Rx8 RDIMM ECC (Eight Sticks)
PSU : Corsair AX1500i
CASE : Roswell RSV-L4500U
Problem:
This is a new build. System does not post & no VGA or dedicated video output or iKVM display. IPMI Post Snooping shows code 22.
Apparent State Of The System:
1. IPMI Shows the wrong CPU & RAM (Probably hardware from previous certification testing?)
2. Heartbeat LED (LEDM1) is normal & Power OK LED (LE1) is solid green (When system is powered on, off when system is powered off) however IPMI Component Info has the power supply greyed out.
Tried:
1. Removing battery and Clear CMOS
2. Successfully updated IPMI to 1.1.6.
3. Semi-Successfully updated BIOS to 2.4 from 2.3. However IPMI still shows v2.3 because system will not boot to the bios.
4. Reset IPMI to factory defaults
5. Installing 1 stick of RAM in slot C1
*6. Installing 1 stick of UDIMM nonECC 32gb RAM in slot C1 (Gave Post Snooping Code 4b)
7. Reinstalling the CPU
CPU : (New) Epyc 7282
Ram : (New) NEMIX MR25600-628 16GB PC4-3200 2Rx8 RDIMM ECC (Eight Sticks)
PSU : Corsair AX1500i
CASE : Roswell RSV-L4500U
Problem:
This is a new build. System does not post & no VGA or dedicated video output or iKVM display. IPMI Post Snooping shows code 22.
Apparent State Of The System:
1. IPMI Shows the wrong CPU & RAM (Probably hardware from previous certification testing?)
2. Heartbeat LED (LEDM1) is normal & Power OK LED (LE1) is solid green (When system is powered on, off when system is powered off) however IPMI Component Info has the power supply greyed out.
Tried:
1. Removing battery and Clear CMOS
2. Successfully updated IPMI to 1.1.6.
3. Semi-Successfully updated BIOS to 2.4 from 2.3. However IPMI still shows v2.3 because system will not boot to the bios.
4. Reset IPMI to factory defaults
5. Installing 1 stick of RAM in slot C1
*6. Installing 1 stick of UDIMM nonECC 32gb RAM in slot C1 (Gave Post Snooping Code 4b)
7. Reinstalling the CPU
Last edited: