Hi, I have just acquired a 8 bay SAS enclosure from a Fujitsu TX300 S7, 8 SAS disks in 2x 5.25" bays, the front is as this one:
Fujitsu HDD Expansion Box, 2.5" SAS - SATA C26361-K835-B276
Thing is, the power is supplied by 2x 4 pin connectors that are a box configuration and all the wires going to the plug are grey.
Does anyone know where I can find out which wire is which so I can either add molex connectors or where I can get adapters or if the molex to CPU adapters would work?
I can supply a picture of the rear of the enclosure should anyone want to see it.
Thanks in advance.
Fujitsu HDD Expansion Box, 2.5" SAS - SATA C26361-K835-B276
Thing is, the power is supplied by 2x 4 pin connectors that are a box configuration and all the wires going to the plug are grey.
Does anyone know where I can find out which wire is which so I can either add molex connectors or where I can get adapters or if the molex to CPU adapters would work?
I can supply a picture of the rear of the enclosure should anyone want to see it.
Thanks in advance.