[FS] [US-IL] Network spring cleaning: Aruba InstantOn AP22 wireless AP & 1930-48 switch, Brocade ICX7150-24 switch, Cisco ISR C1111-8PW router

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

nlj

New Member
Sep 8, 2021
6
21
3
Hi everyone, spring's here so it's time to tidy up my homelab! I'm located in Chicago, IL and can ship via your preference: USPS, FedEx, or UPS. Once you agree to purchase an item and send me your address, I can send you a couple of shipping options for you to choose from. Buyer pays shipping. Reasonable offers are considered, just PM me! Payment to be processed through PayPal (I'll send an invoice to your email).

All devices will be factory reset before shipping to you.

Without further ado, let's get to the good stuff!

  • Brocade ICX 7250-24 – [Spec Sheet]
    • Purchased used in fall 2021 for $290. Selling for $200.
    • Condition: used and a little scuffed/worn but no major damage.
    • Port counts: 24x 1 GbE RJ45, 8x 10 GbE SFP+
    • Single PSU. I replaced the stock fan with a Delta FFB0412VHN-F00, which has reduced the noise level considerably (you can now sit and work next to the switch). I can swap the stock fan back in, if you'd like.
    • Full L3 routing capabilities, 256gbps capacity. CLI and WebUI. No licensing required.
    • Current firmware: 09.0.10 (I can't remember which revision, possibly 'j'). Hardware is EOL/EOS but will continue to receive minor updates on either the 09.x or 09.0.10x train.
    • ServeTheHome has a great thread about these switches.
    • Includes rack ears and power cable. Does not include original box.

  • Aruba InstantOn 1930 48G Switch (JL685A) – [Spec Sheet]
    • Purchased new in fall 2023 for $400. Selling for $300.
    • Condition: open box. Purchased for a project that never went through. I've booted it up a few times to check out its capabilities and to update the firmware. Never used, never even racked.
    • Port counts: 48x 1 GbE RJ45, 4x 1/10 GbE SFP/SFP+
    • Single PSU.
    • Layer 2+, 176 gbps capacity. WebUI. No licensing required.
    • Can be managed locally (more features) or through Aruba's cloud portal (free).
    • Current firmware: 2.9.0 (2.9.1, a small bugfix release, was posted just recently)
    • Includes all original materials: rack ears, power cable, literature, and original box.

  • Aruba InstantOn AP22 Wireless AP – [Spec Sheet]
    • Purchased new in fall 2023 for $180. Selling for $130.
    • Condition: used, like new. Purchased for home use, which it excelled at.
    • Port counts: 1x 1 GbE RJ45, PoE in.
    • Powered via PoE or DC adapter (not included).
    • Wifi 6 – 2x2 MIMO dual-band 802.11ax, 20/40/80 MHz channels.
    • Can only be managed through Aruba's cloud portal (free).
    • Current firmware: 2.9.0.
    • Includes all original materials: AP, mounting assembly, hardware, literature, and original box. Bonus: includes 3D-printed mounting plate for 1-gang electrical boxes.

  • Cisco ISR C1111-8PW Router – [Spec Sheet]
    • Purchased this month for $175. Selling for $150.
    • Condition: used. Purchased for a demo for a project that never went through.
    • Port counts: 8x 1 GbE RJ45 LAN, 1x 1GbE RJ45 WAN + 1x 1 GbE Combo RJ45/SFP WAN.
    • Powered via DC adapter (included).
    • Managed via CLI or WebUI.
    • Current firmware: IOS-XE 17.9.4a (Cupertino). I can load your IOS-XE version (16/17) of choice on the router before I ship it. IOS-XE versions 16.9 and prior do not have Smart Licensing.
    • Includes router, DC adapter, and rack mount kit. Does not include original box or serial cable.
    • I can create a baseline config that enables DHCP on the LAN ports, enables the WebUI and SSH, and has a simple admin password, if you'd like. Otherwise, it will come with a default config that might require console access to configure.
Please feel free to message me with any questions! Thanks for looking!
 
Last edited: