5019A-FTN4 and a few other items.
Quick Delivery and everything appears to be working ok!
Running a burn-in test now.
Quick Delivery and everything appears to be working ok!
Running a burn-in test now.
[FS][US-CA] Clearing out new & used Supermicro 1U systems, ships worldwide
- Thread starter zac1
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
I bought from zac1 4 sticks of 2666 memory. He made sure to validate the RAM before shipping and sent me screenshots of memtest's.
He packaged the ram extremely safely in a box bigger than It should have been, and I he covered the package shipping cost with FedEx Priority Overnight.
If he is selling something you want, buy it through him.
10/10 Experience and communication.
He packaged the ram extremely safely in a box bigger than It should have been, and I he covered the package shipping cost with FedEx Priority Overnight.
If he is selling something you want, buy it through him.
10/10 Experience and communication.
Told my S.O. I got rated a "10/10 experience and communication" and she rolled her eyes and told me to finish cleaning out the garage.
Last edited:
Just a FYI for others lurking on this thread, FedEx just dropped off a Supermicro 5018D-FN4T from @zac1 this morning and everything arrived well packaged and as described. One of the better purchasing experiences I've had online.
Received 2 cases (CSE-505-203B) from Zac1, excellent packing. Thank You!
Hey @zac1 - you are getting married and I moved and am rebuilding from scratch. I have been looking at low-wattage stuff but I am willing to look at the other stuff too.
Here is my post where I was told to check here - https://forums.servethehome.com/ind...starting-over-from-scratch.38865/#post-363873
You know your stuff best. If you have anything that you think will fit my needs, let's help each other out. I just sold another $96 worth of stuff on eBay today, so my budget is up to $1,300 - $1,500 I can spend right now.
Here is my post where I was told to check here - https://forums.servethehome.com/ind...starting-over-from-scratch.38865/#post-363873
You know your stuff best. If you have anything that you think will fit my needs, let's help each other out. I just sold another $96 worth of stuff on eBay today, so my budget is up to $1,300 - $1,500 I can spend right now.
Heya, @Chewy0645! Looking at your thread, it sounds like you need something like a network appliance (firewall/routing) and a NAS/virtualization host.
For networking, I have a ton of compact systems with 4 or more NICs, QAT, fanless or not. You might like the fanless E302-9A. It's one of the quietest servers I've ever not heard. If you prefer something that keeps its heatsinks to itself, there's also the very similar E200-9A — same board, different chassis.
One of the NAS suggestions was a 5028D-TN4T which is an X10SDV-TLN4F (Xeon D-1541) motherboard in a CSE-721TQ 4-bay hot swap chassis. Although more audible than the E302-9A, these have a fairly mellow hum while sporting an impressive >10k passmark. There is also an x16 PCIe slot with room for a half-height, half-length expansion card for something like a GPU or NVMe carrier.
Got lots of RAM, SSDs, and bubble wrap to help get you off to a running start on-time and under-budget. Feel free to shoot me a PM to discuss further.
For networking, I have a ton of compact systems with 4 or more NICs, QAT, fanless or not. You might like the fanless E302-9A. It's one of the quietest servers I've ever not heard. If you prefer something that keeps its heatsinks to itself, there's also the very similar E200-9A — same board, different chassis.
One of the NAS suggestions was a 5028D-TN4T which is an X10SDV-TLN4F (Xeon D-1541) motherboard in a CSE-721TQ 4-bay hot swap chassis. Although more audible than the E302-9A, these have a fairly mellow hum while sporting an impressive >10k passmark. There is also an x16 PCIe slot with room for a half-height, half-length expansion card for something like a GPU or NVMe carrier.
Got lots of RAM, SSDs, and bubble wrap to help get you off to a running start on-time and under-budget. Feel free to shoot me a PM to discuss further.
Last edited:
I received my shipment from @zac1 yesterday. Wow, THAT WAS QUICK! Thank you so much! Everything is working great!
The only standalone boards I have at the moment are higher end. I suppose I could pull an A2SDi-4C-HLN4F from one of the E200-9A systems. Would that work? PM and we can discuss further.Hey Zac I need a Supermicro mini-itx to replace a PBX mobo for a place I volunteer at. Something very very low end and very low budget
@zac1 , The things you're getting rid of are all nicer than anything I own . Except maybe that A2SDi-4C-HLN4F. I'm using one of those for pfSense. But mine is in a crappy chassis and not as nice as the one you are selling
Good luck with the rest of the sale!
. Except maybe that A2SDi-4C-HLN4F. I'm using one of those for pfSense. But mine is in a crappy chassis and not as nice as the one you are selling Good luck with the rest of the sale!
@Markess, thank you! I've tried to impress upon my fiancee just how nice these systems are and she just doesn't get it!