FS: Netgear XS716-T100NES, HP 2920, NiB Xeon CPUs, Samsung SSDs, Cyberpower PDU

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
S

superfula

Member
Mar 8, 2016
88
14
8
I'm trying to liquidate some slightly used, some unused/unopened items from work. Reasonable offers are welcome.

Slightly Used

Most of the following slightly used items were part of the same project that has now been rolled into another so we just don't have a need for the hardware. All are in working order. See attached crystaldiskinfo for the three Evos.

1x Netgear XS716-T100NES - 16 port 10Gbe switch - $1250

1x HP 2920-24G - 24 port, later 3 switch - $650
1x HP 2920-24G 2 Port 10GBASE-TModule - J9732A - $200
We'd prefer if they were purchased together. $800

New/unopened

1x Xeon E5-2630 V3 - $500

1x Xeon E5-1650 V3 - $500

5x Samsung 850 Pro - 1 TB - $350 each

4x Cyberpower CPS-1220
We have 4 of them that are brand new in the box.
https://www.amazon.com/Cyberpower-CPS-1220RMS-Rackmount-Power-Surge/dp/B00077IS32
Surge Protector - CPS1220RMS | CyberPower

Do note that these are 20A models so they will only work with a 20A plug. You can buy 20A to 15A converter plugs.
This is what the plug end looks like, just in case you aren't familiar.
http://image.made-in-china.com/2f0j00TBMQtsWPvqVR/UL-Plug-125V-20A-.jpg
$50 + $10 for part of the shipping. US only. Outside of the US the shipping will be paid for by the buyer.

drive1.PNG drive2.PNG drive3.PNG
 
Last edited:
T

techtoys

Active Member
Feb 25, 2016
189
50
28
58
Peanuthead said:
The plug end can be change couldn't it?
Click to expand...
Yes, there are adapters you an order ... or pick up at a hardware store.
I used one before my 20A circuit was installed at home.

I still use one to feed a strip with the output of my UPS.
The strip reports current draw which is handy
 
S

superfula

Member
Mar 8, 2016
88
14
8
techtoys said:
Yes, there are adapters you an order ... or pick up at a hardware store.
I used one before my 20A circuit was installed at home.

I still use one to feed a strip with the output of my UPS.
The strip reports current draw which is handy
Click to expand...
Yup this is true, there are adapters. Thanks!

I did see your PM.
 
W

wheets

New Member
Apr 24, 2016
11
1
3
Great seller, quick to ship and the X10SDV board I received was well packaged. Thanks Superfula.
 
You must log in or register to reply here.
Top Bottom