FS: Dell/Supermicro Servers, Samsung RAM/SSDs and Juniper Switches

Hello,

I have a variety of hardware for sale today, most were inventory and a few were acquired from a closing company.

Servers
------------------------------------------------------
- Dell R210 w/ X3470 and 4GB DDR3 RAM + 120GB Intel 520 SSD
http://www.dell.com/downloads/global/products/pedge/en/PowerEdge_R210_Tech_Guide.pdf
SOLD

- Dell R210ii w/ E3-1220 and 4GB DDR3 RAM + 320GB Hitachi HDD
https://www.dell.com/downloads/global/products/pedge/en/poweredge-r210-ii-technical-guide.pdf
150 USD + Shipping

- Dell R510 w/ Dual L5520 and 16GB DDR3 RAM + 3x2TB WD Red and 4x128GB Sandisk X110 + Chelsio S310-CR 1x10GB (Great 10GB SAN w/ Caching)
https://www.dell.com/downloads/global/products/pedge/R510_Spec_Sheet.pdf
350 USD + Shipping

- Dell R410 w/ L5630 and 8GB DDR3 RAM + 40GB Intel 320 SSD
https://www.dell.com/downloads/emea/products/R410_spec_sheet.pdf
Can come with pfSense installed
95 USD + Shipping

- Dell R710 w/ Dual X5650 and 96GB DDR3 RAM + 2x1TB WD Green
https://www.dell.com/downloads/global/products/pedge/r710-spec-sheet.pdf
240 USD + Shipping

**All Dell R-Series Servers Add 25$ for Quick Clip ReadyRails

- Supermicro CSE-813M X11SSH-F Motherboard, E3-1270v5, 4x16GB Samsung DDR4, 4x Hotswap Drive Trays
1U Chassis | Chassis | Products - Super Micro Computer, Inc.
X11SSH-F | Motherboards | Products - Super Micro Computer, Inc.
995 USD (Includes Rails) + Shipping (QTY of 3) 2 Left

- Supermicro CSE-813M-4 X9SCL-F Motherboard, E3-1230v2, 4x8GB Super Talent DDR3, 4x Hotswap Drive Trays, LSI SAS 9211-8i RAID, Rails
1U Chassis | Chassis | Products - Super Micro Computer, Inc.
Supermicro | Products | Motherboards | Xeon® Boards | X9SCL-F
320 USD (Includes Rails) + Shipping

- Supermicro CSE-813M X10SLM-F Motherboard, E3-1270v2, 4x8GB Super Talen DDR3, 2x4TB Seagate Constellation ES.3, Rails
1U Chassis | Chassis | Products - Super Micro Computer, Inc.
Supermicro | Products | Motherboards | Xeon® Boards | X10SLM-F
450 (Includes Rails) + Shipping

- Custom PC, Pentium G3258 w/ H80i Watercooling, MSI MPOWER SPZ87 (overclockable), MSI Windforce GTX760 4GB, Corsair CX430 and C70 Red
300 USD + Shipping


Networking Hardware
------------------------------------------------------
- Juniper EX4200-48T-AC w/ 4xSFP Module, Ears and Dual PSU
120 USD (Includes Rack Mounts) + Shipping 3 QTY

- Juniper EX3200-24T-AC w/ Ears and 4xSFP Module
80 USD + Shipping

- Juniper EX2200-48T-AC w/ Ears
75 USD + Shipping

- Mikrotik CCR1036-8G-2S+ 10G Router w/ PSU and Rack Ears
499 USD + Shipping

- Chelsio S320E-LP-CR PCIe Adapter 2x10GB SFP+
35 USD + Shipping (QTY of 3)

- Mellanox MNPA19-XTR CONNECTX-2 PCIe X8 10Gbe SFP+
20 USD + Shipping (QTY of 4)

- Mellanox MHRH2A-XSR CONNECT X-2 QDR Dual 40G IB
35 USD + Shipping (QTY of 4)

- HP/Mellanox Infiniband QSFP to QSFP 40GB/s 1m 4X DDR/QDR Copper Cable 498385-B21
20 USD + Shipping (QTY of 2)

- Arista CAB-SFP-SFP-2M 10GBASE-CR SFP+ Twinax Cable 2M OEM
20 USD + Shipping (QTY of 3)


Hardware Components
------------------------------------------------------
- Samsung 850 Pro 512GB SSD 2.5" SATA
129 USD + Shipping (QTY of 5)

- Samsung 520 Series 120GB SSD 2.5" SATA
45 USD + Shipping

- Western Digital WD2500AAJS Blue Series 250GB 7200RPM SATA HDD LOT OF 4
45 USD + Shipping (For all 4 drives)

- Western Digital WD20EFRX Red Series 2TB NASware 3.0 SATA HDD
65 USD + Shipping (Qty of 4)

- Kingston KVR21R15D4K4/64 64GB (16GB 2Rx4 2G x 72-Bit x 4 pcs.) DDR4 PC4-2133 CL15 Registered w/Parity 288-Pin DIMM Kit
https://www.kingston.com/datasheets/KVR21R15D4K4_64.pdf
https://cdn.discordapp.com/attachments/197535462645170176/396028089051774976/image.jpg
550 USD + Shipping (For all 4 dimms)

- Samsung M391A2K43BB1-CPB 16GB Module DDR4 2133MHz Samsung 17000 Unbuffered Memory RAM
M391A2K43BB1-CPB | UDIMM | Samsung Module | Semiconductor
https://cdn.discordapp.com/attachments/197535462645170176/396028181389377546/image.jpg
140/each USD + Shipping (Qty of 5)

- Nanya NT4GC72B4NA1NL-BE 0932.TW 4GB 2Rx4 PC3-8500R-7-10-E1.1066.ECC 4GB DDR3 Dimm Lot 50
SOLD


Other
------------------------------------------------------
- APC AP7902 Power Supply 16-Outlets 120VAC 24A 50/60Hz w/ Power Cord Attached Switched
150 USD + Shipping

- APC AP7753 Dual Power Supply Dual Bank Auto Transfer Switch 16-Outlets w/ 2 Power Cords Metered
175 USD + Shipping



------------------------------------------------------

- Lots of stuff here, any questions or offers feel free to message me.
- Everything will be UPS Ground unless otherwise requested/notified. Buyer pays to ship unless a deal is agreed to.
- Willing to trade, feel free to offer.

Vouches:
"Received my 50X 4GB DDR3 sticks on Friday. Packaging was ridiculously well done, all the sticks were in a nice RAM container hold and all in the same direction (satisfied my OCD, and made loading the servers easier) and all are working. Solid transaction - thanks!" - cafcwest

"Received the r210 instead of the ii, but @NSKA made it right. Top seller." - joel

PS: Lots of Audio/Video stuff for sale if anyone is interested, from the day job, I am a big A/V installer & distributor.


Thanks,
NCS

 

Mikrotik CCR1036-8G-2S+ 10G Router w/ PSU and Rack Ears


Does this support 10GbT in the SFP+ modules? Any idea?

 

Hi @Churchill ,

According to my research 10GbT transceivers are supported like any other. However, it does depend on the module. If it is newer ~2016+ then it should work, but older ones will draw more power (about 5w) which is too much for any normal SFP+ chassis. The average power output, including on the Mikrotik SFP+ cages is about 2w. If you have a specific transceiver model in mind I am happy to research exactly for that one.

For example, this would work,
Generic 10GbEBASE-T SFP+ Copper RJ45 Transceiver | FS.COM

NCS

 

PM'd.

 

PMed

 

Hi NSKA,
PM'd, do these have PC3-12800e memory sticks (DDR3-1600 ecc vs DDR3-1333 ecc)?
Thx

 

Hi @abq

Didn't get your PM however in most servers that are not DDR4 they are 1600 ECC, however, I can check the machine in question if you are wondering.

 

Waiting on some other PM's to go through. If they fail then I'll circle back to the Mikrotek router. If it's gone, such is life.

 

Received my 50X 4GB DDR3 sticks on Friday. Packaging was ridiculously well done, all the sticks were in a nice RAM container hold and all in the same direction (satisfied my OCD, and made loading the servers easier) and all are working. Solid transaction - thanks!

 

I can definitely relate to the OCD of having the memory in the same direction

 

Appreciate the feedback @cafcwest

If anyone is interested in package deals lmk, looking to move a bit more hardware.

 

Pm sent!

 

pm'd

 

Received the r210 instead of the ii, but @NSKA made it right. Top seller.

 

Thank you, sorry about the mishap.

 

What area are you located if I want to pickup? What is the zip code if I need to calculate shipping costs. Thanks!

 

This seems to be incorrect. X9 motherboards support only v1 and v2 cpus. x10 mbs are for v3 and v4.

 

I must have made a mistake when checking specs, maybe someone will make out well due to my lack of time!

 

Boston area for pickup, you can use 01944 @warlockedyou

 

I am on the east coast as well, NYC/NJ area. But you are 250 miles from me