Fresh OmniOS 151028 installation hangs on Intel S1200btl

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
A

algato

New Member
Sep 18, 2013
13
0
1
Hello,
I am currently installing OmniOsCE r151028 on an Intel mainboard s1200btl. The installation starts, but after a short time it hangs up, I suspect hardware detection. Before that, I set the motherboard to default settings.

Do any of you have any idea why the installation is stopping?

Kind regards
Alex
 
G

gea

Well-Known Member
Dec 31, 2010
3,489
1,371
113
DE
I would try
1. another boot media (re-download USB or iso installer) or

2. install from a CD/DVD drive
The board is quite old, maybe there are problems booting from USB
 
A

algato

New Member
Sep 18, 2013
13
0
1
Im booting from a sata cd-rom, using a usb 1 keyboard. The Mainboard do not have a PS/2 Port.
 
A

algato

New Member
Sep 18, 2013
13
0
1
I just installed the LTS version r151022 without any problems. Could it be that the developers have removed some older drivers ? With the new version r151028 the installation doesn't work. The installation stops at ehci. The motherboard is reset to default settings, it have installed the latest bios
 
A

algato

New Member
Sep 18, 2013
13
0
1
Gea, when I prepare my NAS to use napp-it, is it better to install the newest version of omniosce r151028 or can I stay with the LTS version r151022 ? It will be a NAS for movies and family photos.
Thank you very much for all your answers.
Kind regards
Alex
 
Last edited:
A

algato

New Member
Sep 18, 2013
13
0
1
unfortunately, after the installation of 151028 my computer did not boot anymore. I stay with 151022 LTS.
 
You must log in or register to reply here.
Top Bottom