HiHello everyone,
Just a quick update from me. So the drives are now visible in my computer. They are indeed formatted with a block size of 520. To get around this you have to have the drives connected to a HBA (non-raid) controller. I used a H220 which did the job perfectly. There is a utility out there that you can run within windows to convert and reformat the block size to 512. It would be nice to find the base firmware for the drive to remove the EMC off it but I guess I am being picky.
View attachment 28364
View attachment 28365
can you please write down the procedure or give out the software name for this, I am having same issue, I have pair of drives which are giving similar issue.