I picked up a cheap SMC TigerStack II with 48 ports and it had the 10G card installed in the back but the SFP slot was broken so that part doesn't work.
When it powers up, the fans go to about 85% for 10 or 15 seconds, then about 25% for 10 or 15 seconds, and then settle at 100% at idle. I was wondering if anyone was familiar enough with these devices that they knew how to tell it to keep the fans on low except under the most dire circumstances. It has a serial console that is remarkably similar in command structure to Cisco IOS.
I think it may be the 8848M model of Tigerstack.
When it powers up, the fans go to about 85% for 10 or 15 seconds, then about 25% for 10 or 15 seconds, and then settle at 100% at idle. I was wondering if anyone was familiar enough with these devices that they knew how to tell it to keep the fans on low except under the most dire circumstances. It has a serial console that is remarkably similar in command structure to Cisco IOS.
I think it may be the 8848M model of Tigerstack.