Hello,
I am having an issues with trying to passthough a Nvidia Quadro P1000.
I understand that there is an issue with 7.0 and needing to toggle multiple times, this is not that issue.
When selecting both NVIDIA Corporation GP107GL Quadro P1000 and High Definition Audio Controller, and selecting Toggle passthrough, the High Definition Audio Controller shows 'Active' and Quadro P1000 shows 'Enabled / Needs reboot' as expected.
After rebooting the server, The P1000 still shows 'Enabled / Needs reboot', but my Broadcom MegaRAID SAS Invader Controller (9361-8i) now shows passthrough as 'Active' as well - this is my RAID controller for my main datastores, so of course I can't have it be toggled as passthrough as I am unable to access my vm's and datastore.
Now I have tried to deselect it, and reboot, but it will say enabled as long as the Nvidia card is toggled for passthrough.
I have tried to do this through VCSA and local ESXi, and it produces the same result.
I have tried to manually edit /etc/vmware/ah-trees.conf to remove the RAID controller, but it will simply re-appear after reboot.
I have tried to move the physical cards to different sides of the PCI-E risers, separate them, and still it does the same thing, and they seem to be tied together.
Not sure if this is any help, but the hardware address for MegaRAID 9361-8i is 0000:81:00.0, the P1000 is 0000:83:00.1 (Audio) &0000:93:00.0 (P1000).
The only other things that are on the PCI-E bus are a StarTech PEXUSB312EIC USB controller, and a Dell N20KJ Broadcom 57810 Dual Port 10Gb DA/SFP+ Converged Network Adapter
I would try to go back to 6.5, but I have already updated the VM hardware for all my VM's.
Does anyone have any clue what might be going on, or anything that I can try?
I am running a SuperMicro X10DRW-iT motherboard with RSC-R2UW-2E8E16 & RSC-R2UW-2E8R riser cards
Dual Xeon E5-2630v3 CPU
176gb 1866 MHz DDR4
Broadcom LSI MegaRAID 9361-8i RAID controller
Nvidia P1000 GPU
Dell N20KJ Broadcom 57810 NIC
StarTech PEXUSB312EIC USB 3.1 controller
I am having an issues with trying to passthough a Nvidia Quadro P1000.
I understand that there is an issue with 7.0 and needing to toggle multiple times, this is not that issue.
When selecting both NVIDIA Corporation GP107GL Quadro P1000 and High Definition Audio Controller, and selecting Toggle passthrough, the High Definition Audio Controller shows 'Active' and Quadro P1000 shows 'Enabled / Needs reboot' as expected.
After rebooting the server, The P1000 still shows 'Enabled / Needs reboot', but my Broadcom MegaRAID SAS Invader Controller (9361-8i) now shows passthrough as 'Active' as well - this is my RAID controller for my main datastores, so of course I can't have it be toggled as passthrough as I am unable to access my vm's and datastore.
Now I have tried to deselect it, and reboot, but it will say enabled as long as the Nvidia card is toggled for passthrough.
I have tried to do this through VCSA and local ESXi, and it produces the same result.
I have tried to manually edit /etc/vmware/ah-trees.conf to remove the RAID controller, but it will simply re-appear after reboot.
I have tried to move the physical cards to different sides of the PCI-E risers, separate them, and still it does the same thing, and they seem to be tied together.
Not sure if this is any help, but the hardware address for MegaRAID 9361-8i is 0000:81:00.0, the P1000 is 0000:83:00.1 (Audio) &0000:93:00.0 (P1000).
The only other things that are on the PCI-E bus are a StarTech PEXUSB312EIC USB controller, and a Dell N20KJ Broadcom 57810 Dual Port 10Gb DA/SFP+ Converged Network Adapter
I would try to go back to 6.5, but I have already updated the VM hardware for all my VM's.
Does anyone have any clue what might be going on, or anything that I can try?
I am running a SuperMicro X10DRW-iT motherboard with RSC-R2UW-2E8E16 & RSC-R2UW-2E8R riser cards
Dual Xeon E5-2630v3 CPU
176gb 1866 MHz DDR4
Broadcom LSI MegaRAID 9361-8i RAID controller
Nvidia P1000 GPU
Dell N20KJ Broadcom 57810 NIC
StarTech PEXUSB312EIC USB 3.1 controller