Searching through old stuff in my company I have found PCB board with SLIC connector which you can see below.
Product data:
EMC2 Real SSD P320s SLIC PCIe BZAFLDH001
P/N: MTFDGAU700SAH-1NBABES
WWN: 500A075102040F64
S/N: MRN00130200086
NAND Chips MICRON 2FB11 NW280 / 2GF11 NW280
I have found reviews about P320h version which are quote impressive:
Micron RealSSD P320h Enterprise PCIe Review | StorageReview.com - Storage Reviews
http://www.thessdreview.com/our-rev...l-integration-high-iops-and-absurd-endurance/
My questions are as follows:
Will this drive work with non-EMC boards providing I can successfully connect it? I have found Micron driver but still not sure (EMC 700GB P320s SLIC PCIe Controller | Magic Driver) If yes than:
Are there any commercially available adaptors for SLIC PCIe to PCIe (need 8x 2.0)? If no than I can even go for custom adaptor PCB design and fabrication but the question is:
What type of connector EMC uses? It's 132 line connector with 6 colums x 11 rows with two lines in each cell.
If anyone knows SLIC connector to PCIe x8 pinout it would be very helpfull as well.
Any help would be appreciated.
Product data:
EMC2 Real SSD P320s SLIC PCIe BZAFLDH001
P/N: MTFDGAU700SAH-1NBABES
WWN: 500A075102040F64
S/N: MRN00130200086
NAND Chips MICRON 2FB11 NW280 / 2GF11 NW280
I have found reviews about P320h version which are quote impressive:
Micron RealSSD P320h Enterprise PCIe Review | StorageReview.com - Storage Reviews
http://www.thessdreview.com/our-rev...l-integration-high-iops-and-absurd-endurance/
My questions are as follows:
Will this drive work with non-EMC boards providing I can successfully connect it? I have found Micron driver but still not sure (EMC 700GB P320s SLIC PCIe Controller | Magic Driver) If yes than:
Are there any commercially available adaptors for SLIC PCIe to PCIe (need 8x 2.0)? If no than I can even go for custom adaptor PCB design and fabrication but the question is:
What type of connector EMC uses? It's 132 line connector with 6 colums x 11 rows with two lines in each cell.
If anyone knows SLIC connector to PCIe x8 pinout it would be very helpfull as well.
Any help would be appreciated.
Last edited: