Dwarfpool 92% share accepted

[4004]

Is it just me in seeing a high reject rate? Monero shares

Often see a fraction of a percent rejected. The worst news is the hash rate reported by dwarfpool is down by 10% or more.

 

[Patrick]

Where are you seeing 92%? I am not seeing any rejected in docker logs nor the dwarfpoool interface.

 

[4004]

Where are you seeing 92%? I am not seeing any rejected in docker logs nor the dwarfpoool interface.

In the miner windows (noted the low numbers 10July). Share accepted x/x (percentage) Dwarfpool h/s numbers were down too. Expect an average number, was getting a lot lower average than 9July.

The percentage has improved. Either changing the port number or time has passed. Did not expect changing the port # would help, but was compelled to try something different.

Will check progress in the AM.

PS,
Just restarted the CPU (E5 xeon) wolf miner, seeing 27/31 (87.1%)

 

[Patrick]

Odd. I have a CPU only machine running at around 5KH/s using the Docker image and it is 100.0%

 

[4004]

Odd, I agree 100.0%

Repaired GPU mining & CPU.

The CPU, a restart I guess. Accept rate is 91.1%. No voltage / clock tweaks on an E5... see below.

GPUs repaired by manually verifying voltages and clocks. Don't know the cause of some settings resetting to AUTO, but that is the root cause AUTO = lots of errors.

Did reboot and the CPU is now 100.0%, restarting the client (wolf) several times wasn't the repair.

 

[dodoei]

Start seeing high rate of rejected shares over he weekend, normally a burst of rejects. Seeing as low as 60% accept rate woth newly started workers.

 

[nthu9280]

If you are using xmr-stak-cpu miner on dwarfpool, it's a known issue. I switched to nanopool. I've posted the link to the documented issue on another thread here yesterday.

Sent from my Nexus 6 using Tapatalk