I finally received the CPU and had a chance to install it in my new system using the SuperMicro X10DAX motherboard. Unfortunately Windows 10 Pro is experiencing random and frequent BSOD with varying error messages such as whea uncorrectable error, irql_not_less_or_equal, kernel mode trap, KMODE_EXCEPTION_NOT_HANDLED.
I am using Crucial ECC ram that is compatible with the board, along with a Seasonic 1000W Titanium PSU. I also tried running the system in single CPU mode to try isolate the problem and the BSOD persists....any ideas?
The CPU steppings are:
CPU1 - SR2J0 (reading this off the headspreader)
CPU2 - Revision B00001B, Stepping 1, Model 4F CPU Family 6
UPDATE: ALL PROBLEM RESOLVED WOOOOHOOOOO!
Almost gave up and decided to plea for help online and an ex-lieutenant from the US Navy nuclear forces on anandtech saved my sorry butt. On a late Friday evening, he looked every every screenshot of my bios settings and told me to change two obscure XEON specific power saving features and it magically cleared up ALL my problems.
The following two are disabled on the BIOS:
- Disable C6 State Reporting
- Disable Spread Spectrum
I am using Crucial ECC ram that is compatible with the board, along with a Seasonic 1000W Titanium PSU. I also tried running the system in single CPU mode to try isolate the problem and the BSOD persists....any ideas?
The CPU steppings are:
CPU1 - SR2J0 (reading this off the headspreader)
CPU2 - Revision B00001B, Stepping 1, Model 4F CPU Family 6
UPDATE: ALL PROBLEM RESOLVED WOOOOHOOOOO!
Almost gave up and decided to plea for help online and an ex-lieutenant from the US Navy nuclear forces on anandtech saved my sorry butt. On a late Friday evening, he looked every every screenshot of my bios settings and told me to change two obscure XEON specific power saving features and it magically cleared up ALL my problems.
The following two are disabled on the BIOS:
- Disable C6 State Reporting
- Disable Spread Spectrum
Last edited: