Dell R710 - ServerRiad LSI M1115 Help

[CplusE2]

Hello,



Well i had to reach out for help. I trying to flash my IBM M1115 (9223-8I) to IT mode.



Im trying to do this with the card plugged into a Dell R710. I took out the original PERC 6.i card. It seem the Dell see the 1115 card. The information show Server Raid M1115 FW package 2.0.11.1-10137 Version 4.35.00.



I create the boot drive and it load to the C drive. But nothing happen after i type in the Megarec -cleanflash 0


Iv added a screen show to show how it looks. It just site there and nothing happens.


Thank again for the help. I tried to read ad many posting as i could. But no luck.

 

[Terry Kennedy]

Im trying to do this with the card plugged into a Dell R710. I took out the original PERC 6.i card. It seem the Dell see the 1115 card. The information show Server Raid M1115 FW package 2.0.11.1-10137 Version 4.35.00.Thank again for the help. I tried to read ad many posting as i could. But no luck.View attachment 5288

I've had various problems flashing LSI controllers in Rx10-series Dells. My solution is an old Dell Optiplex desktop that has a PCIe x16 slot - I put them in there, boot the utility disk, flash 'em and then move them back to the Rx10.

 

[CplusE2]

Hmm ok.. Dont have one of those. Maybe at work i can find one. Ok ty