I need to figure out what firmware I should be using to flash the Dell Mezzanine SAS Controller for C6100 - Y8Y69 into IT mode. I have the lsiutil installed and when i try to use the SAS3081E firmware, im getting:
It might work, but I am a bit scared to try. Any recommendations? I want to use this node for a ZFS storage array.root@metroplex:~/lsiutil/Solaris# ./lsiutil.i386
LSI Logic MPT Configuration Utility, Version 1.63, June 4, 2009
1 MPT Port found
Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC
1. mpt0 LSI Logic SAS1068E B3 105 011b0000 0
Enter firmware filename: /root/lsi-firmware/Flash/LSI/3081ETB3.fw
Firmware image's version is MPTFW-01.33.00.00-IT
LSI Logic
MPTSASFW-00.00.00.00
LSI Logic
Image's Product ID appears to be wrong!
Current firmware Product ID is 2704
Image's firmware Product ID is 2204
Image's attached NVDATA appears to be for the wrong board!
Current Board Name is ID4282
Image's Board Name is SAS3081E
Are you sure you want to continue? [Yes or No, default is No] n