Hi all, I've been trying to piece this process together using a bunch of different threads without a lot of luck.
I have a Dell 6XJXK Nvidia ConnectX-6 LX Dual Port Adapter card 10/25GbE SFP28, PCIe Low Profile card that I want to cross-flash to generic FW.
The sticker says Model: CX631102A Rev:E2
I can't figure out how to translate the Dell info into Mallonix OPN; there are 3 631102A options but I want to get MCX631102AS No crypto Secure Boot enabled.
Im running ubuntu server with MFT 4.1.10-149 installed.
I installed it using "sudo ./install.sh --oem"
-I use --oem since it seems to work for others
sudo mlxfwmanager
Querying Mellanox devices firmware ...
Device #1:
----------
Device Type: ConnectX6LX
Part Number: 06XJXK_0R5WK9_Ax
Description: NVIDIA ConnectX-6 LX Dual Port 25 GbE SFP Network Adapter
PSID: DEL0000000031
PCI Device Name: /dev/mst/mt4127_pciconf0
Base GUID: b83fd203000a9330
Base MAC: b83fd20a9330
Versions: Current Available
FW 26.40.1000 N/A
PXE 3.7.0300 N/A
UEFI 14.33.0010 N/A
Status: No matching image found
sudo flint -d /dev/mst/mt4127_pciconf0 query
Image type: FS4
FW Version: 26.40.1000
FW Release Date: 4.2.2024
Product Version: 26.40.1000
Rom Info: type=UEFI version=14.33.10 cpu=AMD64,AARCH64
type=PXE version=3.7.300 cpu=AMD64
Description: UID GuidsNumber
Base GUID: b83fd203000a9330 4
Base MAC: b83fd20a9330 4
Image VSD: N/A
Device VSD: N/A
PSID: DEL0000000031
Security Attributes: secure-fw
I closed the j7 pins to get into livefish mode.
I saw an orange light while I had the jumper closed during boot, but turned off as soon as I took my tweezers off the pads.
sudo mst start
Starting MST (Mellanox Software Tools) driver set
Loading MST PCI module - Success
Loading MST PCI configuration module - Success
Create devices
Unloading MST PCI module (unused) - Success
sudo mst status
MST modules:
------------
MST PCI module is not loaded
MST PCI configuration module loaded
MST devices:
------------
/dev/mst/mt534_pciconf0 - PCI configuration cycles access.
domain:bus:dev.fn=0000:86:00.0 addr.reg=88 data.reg=92 cr_bar.gw_offset=-1
Chip revision is: 00
sudo flint -d /dev/mst/mt534_pciconf0 -ocr hw set Flash0.WriteProtected=Disabled
-W- Firmware flash cache access is enabled. Running in this mode may cause the firmware to hang.
-I- Flash0 parameter was set successfully <-- yeah
I think I need to dump the FW and INI now.
Change the PSID then flash to the generic FW
Finally reboot
Help an idiot out for the next person with an LX card
Thanks!
I have a Dell 6XJXK Nvidia ConnectX-6 LX Dual Port Adapter card 10/25GbE SFP28, PCIe Low Profile card that I want to cross-flash to generic FW.
The sticker says Model: CX631102A Rev:E2
I can't figure out how to translate the Dell info into Mallonix OPN; there are 3 631102A options but I want to get MCX631102AS No crypto Secure Boot enabled.
Im running ubuntu server with MFT 4.1.10-149 installed.
I installed it using "sudo ./install.sh --oem"
-I use --oem since it seems to work for others
sudo mlxfwmanager
Querying Mellanox devices firmware ...
Device #1:
----------
Device Type: ConnectX6LX
Part Number: 06XJXK_0R5WK9_Ax
Description: NVIDIA ConnectX-6 LX Dual Port 25 GbE SFP Network Adapter
PSID: DEL0000000031
PCI Device Name: /dev/mst/mt4127_pciconf0
Base GUID: b83fd203000a9330
Base MAC: b83fd20a9330
Versions: Current Available
FW 26.40.1000 N/A
PXE 3.7.0300 N/A
UEFI 14.33.0010 N/A
Status: No matching image found
sudo flint -d /dev/mst/mt4127_pciconf0 query
Image type: FS4
FW Version: 26.40.1000
FW Release Date: 4.2.2024
Product Version: 26.40.1000
Rom Info: type=UEFI version=14.33.10 cpu=AMD64,AARCH64
type=PXE version=3.7.300 cpu=AMD64
Description: UID GuidsNumber
Base GUID: b83fd203000a9330 4
Base MAC: b83fd20a9330 4
Image VSD: N/A
Device VSD: N/A
PSID: DEL0000000031
Security Attributes: secure-fw
I closed the j7 pins to get into livefish mode.
I saw an orange light while I had the jumper closed during boot, but turned off as soon as I took my tweezers off the pads.
sudo mst start
Starting MST (Mellanox Software Tools) driver set
Loading MST PCI module - Success
Loading MST PCI configuration module - Success
Create devices
Unloading MST PCI module (unused) - Success
sudo mst status
MST modules:
------------
MST PCI module is not loaded
MST PCI configuration module loaded
MST devices:
------------
/dev/mst/mt534_pciconf0 - PCI configuration cycles access.
domain:bus:dev.fn=0000:86:00.0 addr.reg=88 data.reg=92 cr_bar.gw_offset=-1
Chip revision is: 00
sudo flint -d /dev/mst/mt534_pciconf0 -ocr hw set Flash0.WriteProtected=Disabled
-W- Firmware flash cache access is enabled. Running in this mode may cause the firmware to hang.
-I- Flash0 parameter was set successfully <-- yeah
I think I need to dump the FW and INI now.
Change the PSID then flash to the generic FW
Finally reboot
Help an idiot out for the next person with an LX card
Thanks!
Last edited: