Cisco SG200-50 SLM2048T Managed Switch 48 Ports Gigabit 100$
- Thread starter asintado08
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
I just setup mine. I washed all the casing using water and dishsoap. I use tissue paper and 90% alcohol for the internals. It is working correctly but both of the fan that I purchase doesn't work on this.
I just read the blog again on replacing this fan. I didn't take note of that before. Thanks.
Just turn the device on, and if you have a multimeter, look for a ground and a positive steady power souce (if you find one that's on/off, that's your pwm signal).